Hardware Security Module Provider Configuration and Status
The Hardware Security Module Details section shows the HSM configuration settings and the
connectivity status of the HSM.
Hardware Security
Module Details
Provider Configured
Select the HSM vendor configured on the firewall:
None
SafeNet Network HSM
Thales CipherTrust Manager HSM
Entrust nShield HSM
High Availability
(SafeNet Network only) HSM high availability
is configured if checked.
High Availability Group Name
(SafeNet Network only) The group name
configured on the firewall for HSM high availability.
Remote Filesystem Address
(Entrust nShield only) The address of the
remote filesystem.
Firewall Source Address
The address of the port used for the HSM service. By
default this is the management port address. It can be specified as
a different port however through the Services Route Configuration in DeviceSetupServices.
HSM Client Version on Firewall
Shows the HSM client version installed.
Master Key Secured by HSM
If checked, the master key is secured on the
HSM.
Status
Shows green if the firewall is connected and
authenticated to the HSM and shows red if the firewall is not
authenticated or if network connectivity to the HSM is
down.
