Focus

PAN-OS Web Interface Help

Network > Routing > Logical Routers

Table of Contents

Network > Routing > Logical Routers

Description of a logical router and links to static route and dynamic routing field descriptions.

The firewall requires a logical router to obtain routes to other subnets either using static routes that you manually define, or through participation in Layer 3 routing protocols (dynamic routes). Each Layer 3 interface, loopback interface, and VLAN interface defined on the firewall must be associated with a logical router. Each interface can belong to only one logical router.

The logical router is available after you enable Advanced Routing in the General Settings of DeviceSetupManagement and then commit and reboot the firewall.

Defining a logical router requires that you add Layer 3 interfaces to the logical router and configure any combination of static routes and dynamic routing protocols, as required by your network. You can also configure other features, such as ECMP and BFD.

What are you looking for?	See
Required elements of a logical router	Logical Router General settings
Configure:	Static Routes Filters OSPF OSPF Routing Profiles OSPFv3 OSPFv3 Routing Profiles BGP BGP Routing Profiles Multicast Multicast Routing Profiles RIPv2 RIPv2 Routing Profiles BFD Routing Profiles
View information about a logical router.	More Runtime Stats for a Logical Router

BGP Stats for a Logical Router

Network > Routing > Logical Routers > General