Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.

Enter number of seconds between regularly scheduled routing Update messages; range is 5 to 2,147,483,647; default is 30.

Enter number of seconds that a route can be in the routing table without being updated; range is 5 to 2,147,483,647; default is 180. After the Expire interval is reached, the route is still included in Update messages until the Delete interval is reached.

Enter number of seconds in Delete interval; range is 5 to 2,147,483,647; default is 120. When an expired route in the routing table reaches the Delete interval, it is deleted from the routing table.

Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.

Select the type of authentication: md5 (use RIP MD5 authentication method) or password (Simple password authentication).

(Simple password authentication) Enter the password (a maximum of 16 characters) and Confirm Password.

(RIP MD5 authentication) Enter the MD5 Key-ID; range is 0 to 255.

(RIP MD5 authentication) Enter the MD5 Key (a maximum of 16 characters) and Confirm Key.

(RIP MD5 authentication) Select to make this key the Preferred key.

Enter a name for the profile (maximum of 63 characters). The name must start with an alphanumeric character, underscore (_), or hyphen (-), and contain zero or more alphanumeric characters, underscore (_) or hyphen(-). No dot (.) or space is allowed.

Select to allow configuration of this portion of the profile.

Enable the IPv4 Static portion of the profile.

Specify the Metric to apply to the static routes being redistributed into RIPv2 (range is 1 to 65,535).

Select or create a Redistribution Route Map to control which IPv4 static routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

Select to allow configuration of this portion of the profile.

Enable the Connected portion of the profile.

Specify the Metric to apply to the connected routes being redistributed into RIPv2 (range is 1 to 65,535).

Select or create a Redistribution Route Map to control which connected routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

Select to allow configuration of this portion of the profile.

Enable the BGP AFI IPv4 portion of the profile.

Specify the Metric to apply to the BGP IPv4 routes being redistributed into RIPv2 (range is 0 to 4,294,967,295).

Select or create a Redistribution Route Map to control which BGP IPv4 routes are redistributed to RIPv2 and set their attributes. Default is None. If the route map Set configuration includes a Metric Action and Metric Value, they are applied to the redistributed route. Otherwise, the Metric configured on this redistribution profile is applied to the redistributed route.

Select to allow configuration of this portion of the profile.

Enable the OSPFv2 portion of the profile.

Specify the Metric to apply to the OSPFv2 routes being redistributed into RIPv2 (range is 0 to 4,294,967,295).