: Policies > Policy Based Forwarding
Focus
Focus

Policies > Policy Based Forwarding

Table of Contents

Policies > Policy Based Forwarding

Normally, when traffic enters the firewall, the ingress interface virtual router dictates the route that determines the outgoing interface and destination security zone based on destination IP address. By creating a policy-based forwarding (PBF) rule
, you can specify other information to determine the outgoing interface, including source zone, source address, source user, destination address, destination application, and destination service. The initial session on a given destination IP address and port that is associated with an application will not match an application-specific rule and will be forwarded according to subsequent PBF rules (that do not specify an application) or the virtual router’s forwarding table. All subsequent sessions on that destination IP address and port for the same application will match an application-specific rule. To ensure forwarding through PBF rules, application-specific rules are not recommended.
When necessary, PBF rules can be used to force traffic through an additional virtual system using the Forward-to-VSYS forwarding action. In this case, it is necessary to define an additional PBF rule that will forward the packet from the destination virtual system out through a particular egress interface
on the firewall.
The following tables describe the policy-based forwarding settings:
Looking for more?