To configure LLDP, and create an LLDP profile,
you must be a superuser or device administrator (deviceadmin). A
firewall interface supports a maximum of five LLDP peers.
Enable LLDP on the firewall.
edit the LLDP General section; select
Change LLDP global settings.
Transmit Interval (sec)
specify the interval (in seconds) at which LLDPDUs are transmitted.
Default: 30 seconds. Range: 1-3600 seconds.
Transmit Delay (sec)
the delay time (in seconds) between LLDP transmissions sent after
a change is made in a TLV element. The delay helps to prevent flooding
the segment with LLDPDUs if many network changes spike the number
of LLDP changes, or if the interface flaps. The
be less than the
2 seconds. Range: 1-600 seconds.
Hold Time Multiple
a value that is multiplied by the
determine the total TTL Hold Time. Default: 4. Range: 1-100. The
maximum TTL Hold Time is 65535 seconds, regardless of the multiplier