Configure RADIUS Authentication
You can configure RADIUS authentication for end users and firewall or Panorama administrators. For administrators, you can use RADIUS to manage authorization (role and access domain assignments) by defining Vendor-Specific Attributes (VSAs). You can also use RADIUS to implement Multi-Factor Authentication (MFA) for administrators and end users. To enable RADIUS authentication, you must configure a RADIUS server profile that defines how the firewall or Panorama connects to the server. You then assign the server profile to an authentication profile for each set of users who require common authentication settings. What you do with the authentication profile depends on which users the RADIUS server authenticates:
You can also configure client systems to send RADIUS Vendor-Specific Attributes (VSAs) to the RADIUS server by assigning the authentication profile to a GlobalProtect portal or gateway. RADIUS administrators can then perform administrative tasks based on those VSAs.
- Administrative accounts with authorization managed on the RADIUS server—The following procedure describes how to configure RADIUS authentication and authorization for firewall administrators. For Panorama administrators, refer to Configure RADIUS Authentication for Panorama Administrators.
- Add a RADIUS server profile.The profile defines how the firewall connects to the RADIUS server.
- SelectandDeviceServer ProfilesRADIUSAdda profile.
- Enter aProfile Nameto identify the server profile.
- Enter aTimeoutinterval in seconds after which an authentication request times out (default is 3; range is 1–120).If you use the server profile to integrate the firewall with an MFA service, enter an interval that gives users enough time to authenticate. For example, if the MFA service prompts for a one-time password (OTP), users need time to see the OTP on their endpoint device and then enter the OTP in the MFA login page.
- Select theAuthentication Protocol(default isCHAP) that the firewall uses to authenticate to the RADIUS server.SelectCHAPif the RADIUS server supports that protocol; it is more secure thanPAP.
- Addeach RADIUS server and enter the following:
- Nameto identify the server
- RADIUS ServerIP address or FQDN. If you use an FQDN to identify the server and you subsequently change the address, you must commit the change for the new server address to take effect.
- Secret/Confirm Secretis a key to encrypt passwords and can be up to 64 characters in length.
- ServerPortfor authentication requests (default is 1812)
- ClickOKto save the server profile.
- Assign the RADIUS server profile to an authentication profile.The authentication profile defines authentication settings that are common to a set of users.
- SelectandDeviceAuthentication ProfileAdda profile.
- Enter aNameto identify the authentication profile.
- Set theTypetoRADIUS.
- Select theServer Profileyou configured.
- SelectRetrieve user group from RADIUSto collect user group information from VSAs defined on the RADIUS server.The firewall matches the group information against the groups you specify in the Allow List of the authentication profile.
- SelectAdvancedand, in the Allow List,Addthe users and groups that are allowed to authenticate with this authentication profile.
- ClickOKto save the authentication profile.
- Configure the firewall to use the authentication profile for all administrators.
- Selectand edit the Authentication Settings.DeviceSetupManagement
- Select theAuthentication Profileyou configured and clickOK.
- Configure the roles and access domains that define authorization settings for administrators.
- Configure an Admin Role Profile if the administrator uses a custom role instead of a predefined (dynamic) role.
- Configure an access domain if the firewall has more than one virtual system:
- Select,DeviceAccess DomainAddan access domain, and enter aNameto identify the access domain.
- Addeach virtual system that the administrator will access, and then clickOK.
- Commityour changes to activate them on the firewall.
- Configure the RADIUS server to authenticate and authorize administrators.Refer to your RADIUS server documentation for the specific instructions to perform these steps:
- Add the firewall IP address or hostname as the RADIUS client.
- Add the administrator accounts.
- Define the vendor code for the firewall (25461) and define the RADIUS VSAs for the role, access domain, and user group of each administrator.When you predefine dynamic administrator roles for users, use lower-case to specify the role (for example, entersuperuser, notSuperUser).For detailed instructions, refer to the following Knowledge Base articles:When configuring the advanced vendor options on the ACS, you must set both theVendor Length Field SizeandVendor Type Field Sizeto1. Otherwise, authentication will fail.
- Verify that the RADIUS server performs authentication and authorization for administrators.
- Log in the firewall web interface using an administrator account that you added to the RADIUS server.
- Verify that you can access only the web interface pages that are allowed for the role you associated with the administrator.
- In theMonitor,Policies, andObjectstabs, verify that you can access only the virtual systems that are allowed for the access domain you associated with the administrator.
Configure RADIUS Authentication for Panorama Administrators
Configure RADIUS Authentication for Panorama Administrators You can use a RADIUS server to authenticate administrative access to the Panorama web interface. You can also define ...
RADIUS Remote Authentication Dial-In User Service (RADIUS) is a broadly supported networking protocol that provides centralized authentication and authorization. You can configure RADIUS authentication for ...
Device > Server Profiles > RADIUS
Device > Server Profiles > RADIUS Select Device Server Profiles RADIUS or Panorama Server Profiles RADIUS to configure settings for the Remote Authentication Dial-In User ...
Configure Local or External Authentication for Firewall Adm...
Configure Local or External Authentication for Firewall Administrators You can use Local Authentication and External Authentication Services to authenticate administrators who access the firewall. These ...
Set Up RADIUS or TACACS+ Authentication
Set Up RADIUS or TACACS+ Authentication RADIUS is a client/server protocol and software that enables remote access servers to communicate with a central server to ...
Configure Local or External Authentication for Panorama Administrators
Configure Local or External Authentication for Panorama Administrators You can use an external authentication service or the service that is local to Panorama to authenticate ...
Enable Delivery of GlobalProtect Client VSAs to a RADIUS Server
Enable Delivery of GlobalProtect Client VSAs to a RADIUS Server When communicating with GlobalProtect portals or gateways, GlobalProtect clients send information that includes the client ...
Configure TACACS+ Authentication
Configure TACACS+ Authentication You can configure TACACS+ authentication for end users and firewall or Panorama administrators. You can also use a TACACS+ server to manage ...
Administrative Authentication You can configure the following types of authentication and authorization (role and access domain assignment) for firewall administrators: Authentication Method Authorization Method Description ...