Building Blocks for Firewall Interfaces
to display and configure the components that are common to most interface types.
For a description of components that are unique or different when you configure interfaces on a PA-7000 Series firewall, or when you use Panorama™ to configure interfaces on any firewall, see Common Building Blocks for PA-7000 Series Firewall Interfaces.
Firewall Interface Building Blocks
Interface (Interface Name)
The interface name is predefined and you cannot change it. However, you can append a numeric suffix for subinterfaces, aggregate interfaces, VLAN interfaces, loopback interfaces, and tunnel interfaces.
For Ethernet interfaces (
), you can select the interface type:
) that defines the protocols (such as SSH, Telnet, and HTTP) you can use to manage the firewall over this interface.
For Ethernet interfaces, Link State indicates whether the interface is currently accessible and can receive traffic over the network:
Hover over the link state to display a tool tip that indicates the link speed and duplex settings for that interface.
Optional) Configure the IPv4 or IPv6 address of the Ethernet, VLAN, loopback, or tunnel interface. For an IPv4 address, you can also select the addressing mode (
Type) for the interface:
DHCP Client, or
Enter the VLAN tag (1-4,094) for the subinterface.
and modify an existing
Adda new one (see Network > VLANs). Select
Noneto remove the current VLAN assignment from the interface. To enable switching between Layer 2 interfaces, or to enable routing through a VLAN interface, you must configure a VLAN object.
If the firewall supports multiple virtual systems and that capability is enabled, select a virtual system (vsys) for the interface or click
Virtual Systemto define a new vsys.
) for the interface, or select
Zoneto define a new one. Select
Noneto remove the current zone assignment from the interface.
For Ethernet interfaces, this column indicates whether the following features are enabled:
GlobalProtect™ gateway enabled
Link Aggregation Control Protocol (LACP)
Link Layer Discovery Protocol (LLDP)
Quality of Service (QoS) profile
A description of the interface function or purpose.
Recommended For You
Recommended videos not found.