IPSec Tunnel General Tab
- Network > IPSec Tunnels > General
Use the following fields to set up an IPSec tunnel.
IPSec Tunnel General Settings
Enter a Name to identify the tunnel (up to 63 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.
The 63-character limit for this field includes the tunnel name in addition to the Proxy ID, which is separated by a colon character.
Select an existing tunnel interface, or click New Tunnel Interface. For information on creating a tunnel interface, refer to Network > Interfaces > Tunnel.
IPv4 or IPv6
Select IPv4 or IPv6 to configure the tunnel to have endpoints with that IP type of address.
Select whether to use an automatically generated or manually entered security key. Auto key is recommended.
If you choose Auto Key, specify the following:
If you choose Manual Key, specify the following:
If you choose GlobalProtect Satellite, specify the following:
GlobalProtect Gateway Satellite Configuration Tab
GlobalProtect Gateway Satellite Configuration Tab A satellite is a Palo Alto Networks firewall—typically at a branch office—that acts as a GlobalProtect agent to enable it ...
Configure GlobalProtect Gateways for LSVPN
Configure GlobalProtect Gateways for LSVPN Because the GlobalProtect configuration that the portal delivers to the satellites includes the list of gateways the satellite can connect ...
Set Up an IPSec Tunnel
Set Up an IPSec Tunnel The IPSec tunnel configuration allows you to authenticate and/or encrypt the data (IP packet) as it traverses across the tunnel. ...
Prepare the Satellite to Join the LSVPN
Prepare the Satellite to Join the LSVPN To participate in the LSVPN, the satellites require a minimal amount of configuration. Because the required configuration is ...
GlobalProtect Portal Satellite Configuration Tab
GlobalProtect Portal Satellite Configuration Tab A satellite is a Palo Alto Networks® firewall—typically at a branch office—that acts as a GlobalProtect agent to enable the ...
Basic LSVPN Configuration with Static Routing
Basic LSVPN Configuration with Static Routing This quick config shows the fastest way to get up and running with LSVPN. In this example, a single ...
Define the Satellite Configurations
Define the Satellite Configurations When a GlobalProtect satellite connects and successfully authenticates to the GlobalProtect portal, the portal delivers a satellite configuration, which specifies what ...
Advanced LSVPN Configuration with iBGP
Advanced LSVPN Configuration with iBGP This use case illustrates how GlobalProtect LSVPN securely connects distributed office locations with primary and disaster recovery data centers that ...
Site-to-Site VPN with Static and Dynamic Routing
Site-to-Site VPN with Static and Dynamic Routing In this example, one site uses static routes and the other site uses OSPF. When the routing protocol ...