Multicast Tab

The following table describes the virtual router’s Runtime Stats for IP Multicast.
Multicast Runtime Stats
Description
FIB Tab
Group
Multicast group address that the VR will forward.
Source
Multicast source address.
Incoming Interfaces
Indicates interfaces where the multicast traffic comes in on the VR.
IGMP Interface Tab
Interface
Interface that has IGMP enabled.
Version
Version 1, 2, or 3 of Internet Group Management Protocol (IGMP).
Querier
IP address of the IGMP querier on that interface.
Querier Up Time
Length of time that IGMP querier has been up.
Querier Expiry Time
Time remaining before the current the Other Querier Present timer expires.
Robustness
Robustness variable of the IGMP interface.
Groups Limit
Number of multicast groups allowed on the interface.
Sources Limit
Number of multicast sources allowed on the interface.
Immediate Leave
Yes or no indicates whether Immediate Leave is configured. Immediate leave indicates that the virtual router will remove an interface from the forwarding table entry without sending the interface IGMP group-specific queries.
IGMP Membership Tab
Interface
Name of an interface to which the membership belongs.
Group
IP Multicast group address.
Source
Source address of multicast traffic.
Up Time
Length of time this membership been up.
Expiry Time
Length of time remaining before membership expires.
Filter Mode
Include or exclude the source. VR is configured to include all traffic, or only traffic from this source (include), or traffic from any source except this one (exclude).
Exclude Expiry
Time remaining before the interface Exclude state expires.
V1 Host Timer
Time remaining until the local router assumes that there are no longer any IGMP Version 1 members on the IP subnet attached to the interface.
V2 Host Timer
Time remaining until the local router assumes that there are no longer any IGMP Version 2 members on the IP subnet attached to the interface.
PIM Group Mapping Tab
Group
IP address of the group mapped to a Rendezvous Point.
RP
IP address of Rendezvous Point for the group.
Origin
Indicates where the VR learned of the RP.
PIM Mode
ASM or SSM.
Inactive
Indicates that the mapping of the group to the RP is inactive.
PIM Interface Tab
Interface
Name of interface participating in PIM.
Address
IP address of the interface.
DR
IP address of the Designated Router on the interface.
Hello Interval
Hello interval configured, in seconds.
Join/Prune Interval
Join/Prune interval configured, in seconds.
Assert Interval
Assert interval configured, in seconds.
DR Priority
Priority configured for the Designated Router.
BSR Border
Yes or no.
PIM Neighbor Tab
Interface
Name of interface in the VR.
Address
IP address of the neighbor.
Secondary Address
Secondary IP address of the neighbor.
Up Time
Length of time the neighbor has been up.
Expiry Time
Length of time remaining before the neighbor expires because the VR is not receiving hello packets from the neighbor.
Generation ID
Value that the VR received from the neighbor in the last PIM hello message received on this interface.
DR Priority
Designated Router priority that the VR received in the last PIM hello message from this neighbor.

Related Documentation