Configuring the Open Shortest Path First (OSPF) protocol requires
you to configure the following general settings (except BFD, which
Select to enable the OSPF protocol.
Reject Default Route
) Select if you do
not want to learn any default routes through OSPF.
Specify the router ID associated with the
OSPF instance in this virtual router. The OSPF protocol uses the
router ID to uniquely identify the OSPF instance.
To enable Bidirectional Forwarding Detection
(BFD) for OSPF globally for the virtual router on a PA-3000 Series, PA-5000
Series, PA-5200 Series, PA-7000 Series, or VM-Series firewall, select
one of the following:
a BFD profile that you have created on the firewall
New BFD Profile
to create a new BFD
None (Disable BFD)
disable BFD for all OSPF interfaces on the virtual router; you cannot
enable BFD for a single OSPF interface.
In addition, you must configure OSPF settings on the following