Retrieve User Mappings from a Terminal Server Using the PAN-OS XML API
The PAN-OS XML API uses standard HTTP requests to send and receive data. API calls can be made directly from command line utilities such as cURL or using any scripting or application framework that supports RESTful services.
To enable a non-Windows terminal server to send user mapping information directly to the firewall, create scripts that extract the user login and logout events and use them for input to the PAN-OS XML API request format. Then define the mechanisms for submitting the XML API request(s) to the firewall using cURL or wget and providing the firewall’s API key for secure communication. Creating user mappings from multi-user systems such as terminal servers requires use of the following API messages:
- <multiusersystem>—Sets up the configuration for an XML API Multi-user System on the firewall. This message allows for definition of the terminal server IP address (this will be the source address for all users on that terminal server). In addition, the <multiusersystem> setup message specifies the range of source port numbers to allocate for user mapping and the number of ports to allocate to each individual user upon login (called the block size). If you want to use the default source port allocation range (1025-65534) and block size (200), you do not need to send a <multiusersystem> setup event to the firewall. Instead, the firewall will automatically generate the XML API Multi-user System configuration with the default settings upon receipt of the first user login event message.
- <blockstart>—Used with the <login> and <logout> messages to indicate the starting source port number allocated to the user. The firewall then uses the block size to determine the actual range of port numbers to map to the IP address and username in the login message. For example, if the <blockstart> value is 13200 and the block size configured for the multi-user system is 300, the actual source port range allocated to the user is 13200 through 13499. Each connection initiated by the user should use a unique source port number within the allocated range, enabling the firewall to identify the user based on its IP address-port-user mappings for enforcement of user- and group-based security rules. When a user exhausts all the ports allocated, the terminal server must send a new <login> message allocating a new port range for the user so that the firewall can update the IP address-port-user mapping. In addition, a single username can have multiple blocks of ports mapped simultaneously. When the firewall receives a <logout> message that includes a <blockstart> parameter, it removes the corresponding IP address-port-user mapping from its mapping table. When the firewall receives a <logout> message with a username and IP address, but no <blockstart>, it removes the user from its table. And, if the firewall receives a <logout> message with an IP address only, it removes the multi-user system and all mappings associated with it.
The XML files that the terminal server sends to the firewall can contain multiple message types and the messages do not need to be in any particular order within the file. However, upon receiving an XML file that contains multiple message types, the firewall will process them in the following order: multiusersystem requests first, followed by logins, then logouts.
The following workflow provides an example of how to use the PAN-OS XML API to send user mappings from a non-Windows terminal server to the firewall.
- Generate the API key that will be used to authenticate
the API communication between the firewall and the terminal server.
To generate the key you must provide login credentials for an administrative
account; the API is available to all administrators (including role-based
administrators with XML API privileges enabled).Any special characters in the password must be URL/ percent-encoded.From a browser, log in to the firewall. Then, to generate the API key for the firewall, open a new browser window and enter the following URL:
https://<Firewall-IPaddress>/api/?type=keygen&user=<username>&password=<password>Where <Firewall-IPaddress> is the IP address or FQDN of the firewall and <username> and <password> are the credentials for the administrative user account on the firewall. For example:
https://10.1.2.5/api/?type=keygen&user=admin&password=adminThe firewall responds with a message containing the key, for example:
<response status="success"> <result> <key>k7J335J6hI7nBxIqyfa62sZugWx7ot%2BgzEA9UOnlZRg=</key> </result> </response>
- (Optional) Generate a setup message that the
terminal server will send to specify the port range and block size
of ports per user that your terminal services agent uses.If the terminal services agent does not send a setup message, the firewall will automatically create a Terminal Services agent configuration using the following default settings upon receipt of the first login message:
The following shows a sample setup message:
- Default port range: 1025 to 65534
- Per user block size: 200
- Maximum number of multi-user systems: 1,000
<uid-message> <payload> <multiusersystem> <entry ip="10.1.1.23" startport="20000" endport="39999" blocksize="100/"> </multiusersystem> </payload> <type>update</type> <version>1.0</version> </uid-message>where entry ip specifies the IP address assigned to terminal server users, startport and endport specify the port range to use when assigning ports to individual users, and blocksize specifies the number of ports to assign to each user. The maximum blocksize is 4000 and each multi-user system can allocate a maximum of 1000 blocks.If you define a custom blocksize and or port range, keep in mind that you must configure the values such that every port in the range gets allocated and that there are no gaps or unused ports. For example, if you set the port range to 1000–1499, you could set the block size to 100, but not to 200. This is because if you set it to 200, there would be unused ports at the end of the range.
- Create a script that will extract the login events and
create the XML input file to send to the firewall.Make sure the script enforces assignment of port number ranges at fixed boundaries with no port overlaps. For example, if the port range is 1000–1999 and the block size is 200, acceptable blockstart values would be 1000, 1200, 1400, 1600, or 1800. Blockstart values of 1001, 1300, or 1850 would be unacceptable because some of the port numbers in the range would be left unused.The login event payload that the terminal server sends to the firewall can contain multiple login events.The following shows the input file format for a PAN-OS XML login event:
<uid-message> <payload> <login> <entry name="acme\jjaso" ip="10.1.1.23" blockstart="20000"> <entry name="acme\jparker" ip="10.1.1.23" blockstart="20100"> <entry name="acme\ccrisp" ip="10.1.1.23" blockstart="21000"> </login> </payload> <type>update</type> <version>1.0</version> </uid-message>The firewall uses this information to populate its user mapping table. Based on the mappings extracted from the example above, if the firewall received a packet with a source address and port of 10.1.1.23:20101, it would map the request to user jparker for policy enforcement.Each multi-user system can allocate a maximum of 1,000 port blocks.
- Create a script that will extract the logout events and
create the XML input file to send to the firewall.Upon receipt of a logout event message with a blockstart parameter, the firewall removes the corresponding IP address-port-user mapping. If the logout message contains a username and IP address, but no blockstart parameter, the firewall removes all mappings for the user. If the logout message contains an IP address only, the firewall removes the multi-user system and all associated mappings.The following shows the input file format for a PAN-OS XML logout event:
<uid-message> <payload> <logout> <entry name="acme\jjaso" ip="10.1.1.23" blockstart="20000"> <entry name="acme\ccrisp" ip="10.1.1.23"> <entry ip="10.2.5.4"> </logout> </payload> <type>update</type> <version>1.0</version> </uid-message>You can also clear the multiuser system entry from the firewall using the following CLI command: clear xml-api multiusersystem
- Make sure that the scripts you create include a way to
dynamically enforce that the port block range allocated using the
XML API matches the actual source port assigned to the user on the
terminal server and that the mapping is removed when the user logs
out or the port allocation changes.One way to do this would be to use netfilter NAT rules to hide user sessions behind the specific port ranges allocated via the XML API based on the uid. For example, to ensure that a user with the user ID jjaso is mapped to a source network address translation (SNAT) value of 10.1.1.23:20000-20099, the script you create should include the following:
[root@ts1 ~]# iptables -t nat -A POSTROUTING -m owner --uid-owner jjaso -p tcp -j SNAT --to-source 10.1.1.23:20000-20099Code copied to clipboardUnable to copy due to lack of browser support.Similarly, the scripts you create should also ensure that the IP table routing configuration dynamically removes the SNAT mapping when the user logs out or the port allocation changes:
[root@ts1 ~]# iptables -t nat -D POSTROUTING 1Code copied to clipboardUnable to copy due to lack of browser support.
- Define how to package the XML input files containing
the setup, login, and logout events into wget or cURL messages for
transmission to the firewall.To apply the files to the firewall using wget:
> wget --post file <filename> “https://<Firewall-IPaddress>/api/?type=user-id&key=<key>&file-name=<input_filename.xml>&client=wget&vsys=<VSYS_name>”Code copied to clipboardUnable to copy due to lack of browser support.For example, the syntax for sending an input file named login.xml to the firewall at 10.2.5.11 using key k7J335J6hI7nBxIqyfa62sZugWx7ot%2BgzEA9UOnlZRg using wget would look as follows:
> wget --post file login.xml “https://10.2.5.11/api/?type=user-id&key=k7J335J6hI7nBxIqyfa62sZugWx7ot%2BgzEA9UOnlZRg&file-name=login.xml&client=wget&vsys=vsys1”Code copied to clipboardUnable to copy due to lack of browser support.To apply the file to the firewall using cURL:
> curl --form file=@<filename> https://<Firewall-IPaddress>/api/?type=user-id&key=<key>&vsys=<VSYS_name>Code copied to clipboardUnable to copy due to lack of browser support.For example, the syntax for sending an input file named login.xml to the firewall at 10.2.5.11 using key k7J335J6hI7nBxIqyfa62sZugWx7ot%2BgzEA9UOnlZRg using cURL would look as follows:
> curl --form email@example.com “https://10.2.5.11/api/?type=user-id&key=k7J335J6hI7nBxIqyfa62sZugWx7ot%2BgzEA9UOnlZRg&vsys=vsys1”Code copied to clipboardUnable to copy due to lack of browser support.
- Verify that the firewall is successfully receiving login
events from the terminal servers.Verify the configuration by opening an SSH connection to the firewall and then running the following CLI commands:To verify if the terminal server is connecting to the firewall over XML:
admin@PA-5050> show user xml-api multiusersystem Host Vsys Users Blocks ---------------------------------------- 10.5.204.43 vsys1 5 2To verify that the firewall is receiving mappings from a terminal server over XML:
admin@PA-5050> show user ip-port-user-mapping all Global max host index 1, host hash count 1 XML API Multi-user System 10.5.204.43 Vsys 1, Flag 3 Port range: 20000 - 39999 Port size: start 200; max 2000 Block count 100, port count 20000 20000-20199: acme\administrator Total host: 1
Apply User-ID Mapping and Populate Dynamic Address Groups (...
Apply User-ID Mapping and Populate Dynamic Address Groups (API) Use the type=user-id parameter to apply User-ID mapping information directly to the firewall. If you are ...
Port Mapping In environments with multi-user systems—such as Microsoft Terminal Server or Citrix environments—many users share the same IP address. In this case, the user-to-IP ...
Configure User Mapping for Terminal Server Users
Configure User Mapping for Terminal Server Users Individual terminal server users appear to have the same IP address and therefore an IP address-to-username mapping is ...
Map IP Addresses to Users
Map IP Addresses to Users User-ID provides many different methods for mapping IP addresses to usernames. Before you begin configuring user mapping, consider where your ...
Device > User Identification > Terminal Services Agents
Device > User Identification > Terminal Services Agents On a system that supports multiple users who share the same IP address, a Terminal Services (TS) ...
Configure the Palo Alto Networks Terminal Services Agent fo...
Configure the Palo Alto Networks Terminal Services Agent for User Mapping Use the following procedure to install and configure the TS agent on the terminal ...
Send User Mappings to User-ID Using the XML API
Send User Mappings to User-ID Using the XML API User-ID provides many out-of-the box methods for obtaining user mapping information. However, you might have applications ...
Ports Used for User-ID
Ports Used for User-ID User-ID is a feature that enables mapping of user IP addresses to usernames and group memberships, enabling user- or group-based policy ...
Enable User-ID The user identity, as opposed to an IP address, is an integral component of an effective security infrastructure. Knowing who is using each ...