Device > Server Profiles > NetFlow
Palo Alto Networks firewalls can export statistics about the IP traffic on their interfaces as NetFlow fields to a NetFlow collector. The NetFlow collector is a server you use to analyze network traffic for security, administration, accounting and troubleshooting. All Palo Alto Networks firewalls support NetFlow Version 9. The firewalls support only unidirectional NetFlow, not bidirectional. The firewalls perform NetFlow processing on all IP packets on the interfaces and do not support sampled NetFlow. You can export NetFlow records for Layer 3, Layer 2, virtual wire, tap, VLAN, loopback, and tunnel interfaces. For aggregate Ethernet interfaces, you can export records for the aggregate group but not for individual interfaces within the group. The firewalls support standard and enterprise (PAN-OS specific) NetFlow templates, which NetFlow collectors use to decipher the NetFlow fields. The firewalls select a template based on the type of exported data: IPv4 or IPv6 traffic, with or without NAT, and with standard or enterprise-specific fields.
To configure NetFlow exports,
Adda NetFlow server profile to specify which NetFlow servers will receive the exported data and to specify export parameters. After you assign the profile to an interface (see Network > Interfaces), the firewall exports NetFlow data for all traffic on that interface to the specified servers.
Enter a name for the Netflow server profile (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.
Template Refresh Rate
The firewall periodically refreshes NetFlow templates to re-evaluate which one to use (in case the type of exported data changes) and to apply any changes to the fields in the selected template. Specify the rate at which the firewall refreshes NetFlow templates in
Minutes(range is 1 to 3,600; default is 30) and
Packets(exported records—range is 1 to 600; default is 20), according to the requirements of your NetFlow collector. The firewall refreshes the template after either threshold is passed. The required refresh rate depends on the NetFlow collector. If you add multiple NetFlow collectors to the server profile, use the value of the collector with the fastest refresh rate.
Specify the frequency (in minutes) at which the firewall exports data records for each session (range is 1 to 60; default is 5). Set the frequency based on how often you want the NetFlow collector to update traffic statistics.
PAN-OS Field Types
Export PAN-OS specific fields for App-ID and the User-ID service in Netflow records.
Specify a name to identify the server (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, spaces, hyphens, and underscores.
Specify the hostname or IP address of the server. You can add a maximum of two servers per profile.
Specify the port number for server access (default is 2055).
Configure NetFlow Exports
Configure NetFlow Exports To use a NetFlow collector for analyzing the network traffic on firewall interfaces, perform the following steps to configure NetFlow record exports. ...
NetFlow Monitoring NetFlow is an industry-standard protocol that the firewall can use to export statistics about the IP traffic on its interfaces. The firewall exports ...
NetFlow Templates NetFlow collectors use templates to decipher the fields that the firewall exports. The firewall selects a template based on the type of exported ...
Tap Interface Network > Interfaces > Ethernet You can use a tap interface to monitor traffic on a port. To configure a tap interface, click ...
PA-7000 Series Layer 2 Subinterface
PA-7000 Series Layer 2 Subinterface Network > Interfaces > Ethernet For each Ethernet port configured as a physical Layer 2 interface, you can define an ...
Virtual Wire Subinterface
Virtual Wire Subinterface Network > Interfaces > Ethernet Virtual wire (vwire) subinterfaces allow you to separate traffic by VLAN tags or a VLAN tag and ...
Network > Interfaces > Tunnel
Network > Interfaces > Tunnel Use the following fields to configure a tunnel interface: Tunnel Interface Settings Configure In Description Interface Name Tunnel Interface The ...
Use External Services for Monitoring
Use External Services for Monitoring Using an external service to monitor the firewall enables you to receive alerts for important events, archive monitored information on ...
PA-7000 Series Layer 2 Interface
PA-7000 Series Layer 2 Interface Network > Interfaces > Ethernet Select Network Interfaces Ethernet to configure a Layer 2 interface. click the name of an ...