- Network > DHCP > DHCP Relay
Before configuring a firewall interface as a DHCP relayagent, make sure you have configured a Layer 3 Ethernet or Layer 3 VLAN interface and that you assigned the interface to a virtual router and a zone. You want that interface to be able to pass DHCP messages between clients and servers. Each interface can forward messages to a maximum of eight external IPv4 DHCP servers and eight external IPv6 DHCP servers. A client sends a DHCPDISCOVER message to all configured servers, and the firewall relays the DHCPOFFER message of the first server that responds back to the requesting client.
DHCP Relay Settings
Name of the interface that will be the DHCP relay agent.
IPv4 / IPv6
Select the type of DHCP server and IP address you will specify.
DHCP Server IP Address
Enter the IP address of the DHCP server to and from which you will relay DHCP messages.
If you selected IPv6 as the IP address protocol for the DHCP server and specified a multicast address, you must also specify an outgoing interface.
Configure an Interface as a DHCP Relay Agent
Configure an Interface as a DHCP Relay Agent To enable a firewall interface to transmit DHCP messages between clients and servers , you must configure ...
DHCP This section describes Dynamic Host Configuration Protocol (DHCP) and the tasks required to configure an interface on a Palo Alto Networks firewall to act ...
DHCP Overview DHCP is a standardized protocol defined in RFC 2131 , Dynamic Host Configuration Protocol . DHCP has two main purposes: to provide TCP/IP ...
DHCP Overview Network > DHCP DHCP uses a client-server model of communication. This model consists of three roles that the firewall can fulfill: DHCP client, ...
Network > DHCP
Network > DHCP Dynamic Host Configuration Protocol (DHCP) is a standardized protocol that provides TCP/IP and link-layer configuration parameters and network addresses to dynamically configured ...
Configure an Interface as a DHCP Server
Configure an Interface as a DHCP Server The prerequisites for this task are: Configure a Layer 3 Ethernet or Layer 3 VLAN interface. Assign the ...
DHCP Messages DHCP uses eight standard message types, which are identified by an option type number in the DHCP message. For example, when a client ...
Firewall as a DHCP Server and Client
Firewall as a DHCP Server and Client The firewall can function as a DHCP server and as a DHCP client. Dynamic Host Configuration Protocol , ...
Configure the Management Interface as a DHCP Client
Configure the Management Interface as a DHCP Client The management interface on the firewall supports DHCP client for IPv4, which allows the management interface to ...