Configure the settings described in the following table to create
rules for redistributing BGP routes.
BGP Redistribution
Rules Settings
Configure In
Description
Allow Redistribute Default Route
BGP
Redist Rules
Permits the firewall to redistribute its
default route to BGP peers.
Name
Add
an IP subnet
or create a redistribution rule first.
Enable
Select to enable this redistribution rule.
Route Table
Specify which route table the route will
be redistributed into:
unicast
,
multicast
,
or
both
.
Metric
Enter a metric in the range 1-65,535.
Set Origin
Select the origin for the redistributed
route (
igp
,
egp
, or
incomplete
).
The value
incomplete
indicates a connected
route.
Set MED
Enter a MED for the redistributed route
in the range 0-4,294,967,295.
Set Local Preference
Enter a local preference for the redistributed
route in the range 0-4,294,967,295.
Set AS Path Limit
Enter an AS path limit for the redistributed
route in the range 1-255.
Set Community
Select or enter a 32-bit value in decimal
or hexadecimal or in AS:VAL format; AS and VAL are each in the range 0-65,535.
Enter a maximum of 10 communities.
Set Extended Community
Enter a 64-bit value in hexadecimal or in
TYPE:AS:VAL or TYPE:IP:VAL format. TYPE is 16 bits; AS or IP is
16 bits; VAL is 32 bits. Enter a maximum of five extended communities.
