Panorama > Scheduled Config Export
To schedule an export of all the running configurations on Panorama and firewalls, Add an export task and configure the settings as described in the following table.
If Panorama has a high availability (HA) configuration, you must perform these instructions on each peer to ensure the scheduled exports continue after a failover. Panorama does not synchronize scheduled configuration exports between HA peers.
Scheduled Configuration Export Settings
Enter a name to identify the configuration export job (up to 31 characters). The name is case-sensitive and must be unique. Use only letters, numbers, hyphens, and underscores.
Enter an optional description.
Select to enable the export job.
Scheduled export start time (daily)
Specify the time of day to start the export (24 hour clock, format HH:MM).
Select the protocol to use to export logs from Panorama to a remote host. Secure Copy (SCP) is a secure protocol; FTP is not.
Enter the IP address or hostname of the target SCP or FTP server.
Enter the port number on the target server.
Specify the path to the folder or directory on the target server that will store the exported configuration.
For example, if the configuration bundle is stored in a folder called exported_config within a top level folder called Panorama, the syntax for each server type is:
Enable FTP Passive Mode
Select to use FTP passive mode.
Specify the username required to access the target system.
Password / Confirm Password
Specify the password required to access the target system.
Use a password with maximum length of 15 characters. If the password exceeds 15 characters, the test SCP connection will display an error because the firewall encrypts the password when it tries to connect to the SCP server and the length of the encrypted password can be up to 63 characters only.
Test SCP server connection
Select to test communication between Panorama and the SCP host/server.
To enable the secure transfer of data, you must verify and accept the host key of the SCP server. The connection is not established until the host key is accepted. If Panorama has an HA configuration, you must perform this verification on each HA peer so that each one accepts the host key of the SCP server.
Device > Scheduled Log Export
Device > Scheduled Log Export You can schedule exports of logs and save them in CSV format to a File Transfer Protocol (FTP) server or ...
Schedule Log Exports to an SCP or FTP Server
Schedule Log Exports to an SCP or FTP Server You can schedule exports of Traffic, Threat, URL Filtering, Data Filtering, HIP Match, and WildFire Submission ...
Schedule Export of Configuration Files
Schedule Export of Configuration Files Panorama saves a backup of its running configuration as well as the running configurations of all managed firewalls. The backups ...
Device > Setup > Operations
Device > Setup > Operations You can perform the following tasks to manage the running and candidate configurations of the firewall and Panorama™. If you’re ...
Save and Export Panorama and Firewall Configurations
Save and Export Panorama and Firewall Configurations Saving a backup of the candidate configuration to persistent storage on Panorama enables you to later restore that ...
Use Secure Copy to Import and Export Files
Use Secure Copy to Import and Export Files Secure Copy (SCP) is a convenient way to import and export files onto or off of a ...
Use the Panorama Web Interface
Use the Panorama Web Interface The web interface on both Panorama and the firewall has the same look and feel. However, the Panorama web interface ...
Export API Key using Secure Copy (SCP)
Export API Key using Secure Copy (SCP) Use this command to export an API key using secure copy (SCP): Save all API keys to a ...