GlobalProtect Portals Agent App Tab
Apptab to specify how end users interact with the GlobalProtect apps installed on their systems. You can define different app settings for the different GlobalProtect agent configurations you create.
GlobalProtect App Configuration Settings
Select a welcome page to present to end-users after they connect to GlobalProtect. You can select the
Importa custom page. The default is
GlobalProtect App Config Refresh Interval (hours)
Specify the number of hours the GlobalProtect portal waits before it initiates the next refresh of an app’ss configuration (range is 1 to 168; default is 24).
Allow User to Disable GlobalProtect App
Specifies whether users are allowed to disable the GlobalProtect app and, if so, what—if anything—they must do before they can disable the app:
Allow User to Uninstall GlobalProtect App
Specifies whether users are allowed to uninstall the GlobalProtect app and, if so, what—if anything—they must do before they can uninstall the app:
This option requires Content Release version 8196-5685 and later.
Allow User to Upgrade GlobalProtect App
Specifies whether end-users can upgrade the GlobalProtect app software and, if they can, whether they can choose when to upgrade:
Allow User to Sign Out from GlobalProtect App
Windows, macOS, iOS, Android, and Chrome Only)
Specifies whether users are permitted to manually sign out of the Globalprotect app:
This option requires Content Release version 8196-5685 and later.
Use Single Sign-on (
Noto disable single sign-on (SSO). With SSO enabled (default), the GlobalProtect app automatically uses the Windows login credentials to authenticate and then connect to the GlobalProtect portal and gateway. GlobalProtect can also wrap third-party credentials to ensure that Windows users can authenticate and connect even when a third-party credential provider is used to wrap the Windows login credentials.
Use Single Sign-on (
Noto disable single sign-on (SSO). With SSO enabled (default), the GlobalProtect app automatically uses the macOS login credentials to authenticate and then connect to the GlobalProtect portal and gateway.
This option requires Content Release version 8196-5685 and later.
Clear Single Sign-On Credentials on Logout
Noto keep single sign-on credentials when the user logs out. Select
Yes(default) to clear them and force the user to enter credentials upon the next login.
Use Default Authentication on Kerberos Authentication Failure
Noto use only Kerberos authentication. Select
Yes(default) to retry authentication by using the default authentication method after a failure to authenticate with Kerberos. This feature is supported for Mac and Windows endpoints only.
Automatic Restoration of VPN Connection Timeout
Enter a timeout value, in minutes, from 0 to 180 to specify the action the GlobalProtect app takes when the tunnel is disconnected due to network instability or endpoint state changes by entering; default is 30.
Wait Time Between VPN Connection Restore Attempts
Enter the amount of time, in seconds, the GlobalProtect app waits between attempts to reestablish the connection with the last-connected gateway when you enable
Automatic Restoration of VPN Connection Timeout. Specify a longer or shorter wait time depending on your network conditions. Range is 1 to 60 seconds; the default is 5.
This time interval is used as TCP timeout for restoration attempt in case of SSL VPN tunnel; and it is used as UDP keepalive timeout for restoration attempt in case of IPSec tunnel.
On Always-On mode, the GlobalProtect app will keep retrying indefinitely at the configured
Wait Time Between VPN Connection Restore Attempts.But On-Demand mode, the GlobalProtect app will try once for the duration of timeout configured on
Wait Time Between VPN Connection Restore Attemptsand if no success within the timeout period it will give up and switch to disconnected state and not retry again.
Enforce GlobalProtect Connection for Network Access
Yesto force all network traffic to traverse a GlobalProtect tunnel. Select
No(default) if GlobalProtect is not required for network access and users can still access the internet even when GlobalProtect is disabled or disconnected.
To provide instructions to users before traffic is blocked, configure a
Traffic Blocking Notification Messageand optionally specify when to display the message (
Traffic Blocking Notification Delay).
To permit traffic required to establish a connection with a captive portal, specify a
Captive Portal Exception Timeout. The user must authenticate with the portal before the timeout expires. To provide additional instructions, configure a
Captive Portal Detection Messageand optionally specify when to display the message (
Captive Portal Notification Delay).
In most cases, use the default selection
Yesblocks all network traffic to and from the endpoint until the app connects to an internal gateway inside the enterprise or to an external gateway outside the enterprise network.
Allow traffic to specified hosts/networks when Enforce GlobalProtect Connection for Network Access is enabled and GlobalProtect Connection is not established
If desired, you can configure up to ten IP addresses or network segments for which you want to allow access when you enforce GlobalProtect for network access but the connection is not established. Separate multiple values with commas. Exclusions can improve the user experience by allowing users to access local resources when GlobalProtect is disconnected. For example when GlobalProtect is not connected, GlobalProtect can exclude link-local addresses to allow access to a local network segment or broadcast domain. This option requires Content Release version 8196-5685 and later.
Captive Portal Exception Timeout (sec)
To enforce GlobalProtect for network access but provide a grace period to allow users enough time to connect to a captive portal, specify the timeout in seconds (range is 0 to 3600). For example, a value of 60 means the user must log in to the captive portal within one minute after GlobalProtect detects the captive portal. A value of 0 means GlobalProtect does not allow users to connect to a captive portal and immediately blocks access.
Automatically Launch Webpage in Default Browser Upon Captive Portal Detection
To automatically launch your default web browser upon captive portal detection so that users can log in to the captive portal seamlessly, enter the fully qualified domain name (FQDN) or IP address of the website that you want to use for the initial connection attempt that initiates web traffic when the default web browser launches (maximum length is 256 characters). The captive portal then intercepts this website connection attempt and redirects the default web browser to the captive portal login page. If this field is empty (default), GlobalProtect does not launch the default web browser automatically upon captive portal detection.
Traffic Blocking Notification Delay (sec)
Specify a value, in seconds, to determine when to display the notification message. GlobalProtect starts the countdown to display the notification after the network is reachable (range is 5 to 120; default is 15).
Display Traffic Blocking Notification Message
Specifies whether a message appears when GlobalProtect is required for network access. Select
Noto disable the message. Select
Yesto enable the message (GlobalProtect displays the message when GlobalProtect is disconnected but detects that the network is reachable.)
Traffic Blocking Notification Message
Customize a notification message to display to users when GlobalProtect is required for network access. GlobalProtect displays the message when GlobalProtect is disconnected but detects the network is reachable. The message can indicate the reason for blocking the traffic and provide instructions on how to connect. For example:
The message must be 512 or fewer characters.
Allow User to Dismiss Traffic Blocking Notifications
Noto always display traffic blocking notifications. By default the value is set to
Yesmeaning users are permitted to dismiss the notifications.
Display Captive Portal Detection Message
Specifies whether a message appears when GlobalProtect detects a captive portal. Select
Yesto display the message. Select
No(default) to suppress the message (GlobalProtect does not display a message when GlobalProtect detects a captive portal).
If you enable a Captive Portal Detection Message, the message appears 85 seconds before the Captive Portal Exception Timeout. So if the Capture Portal Exception Timeout is 90 seconds or less, the message appears 5 seconds after a captive portal is detected.
Captive Portal Detection Message
Customize a notification message to display to users when GlobalProtect detects the network which provides additional instructions for connecting to a captive portal. For example:
The message must be 512 or fewer characters.
Captive Portal Detection Delay
If you enable a Captive Portal Detection Message, you can specify the delay in seconds after captive portal detection at which GlobalProtect displays the detection message (range is 1 to 120; default is 5).
Client Certificate Store Lookup
Select the type of certificate or certificates that an app looks up in its personal certificate store. The GlobalProtect app uses the certificate to authenticate to the portal or a gateway and then establish a VPN tunnel to the GlobalProtect gateway.
SCEP Certificate Renewal Period (days)
This mechanism is for renewing a SCEP-generated certificate before the certificate actually expires. You specify the maximum number of days before certificate expiry that the portal can request a new certificate from the SCEP server in your PKI system (range is 0 to 30; default is 7). A value of 0 means that the portal does not automatically renew the client certificate when it refreshes a client configuration.
For an app to get the new certificate, the user must log in during the renewal period (the portal does not request the new certificate for a user during this renewal period unless the user logs in).
For example, suppose that a client certificate has a lifespan of 90 days and this certificate renewal period is 7 days. If a user logs in during the final 7 days of the certificate lifespan, the portal generates the certificate and downloads it along with a refreshed client configuration. See GlobalProtect App Config Refresh Interval (hours).
Extended Key Usage OID for Client Certificate
Enter the extended key usage of a client certificate by specifying its object identifier (OID). This setting ensures that the GlobalProtect app selects only a certificate that is intended for client authentication and enables GlobalProtect to save the certificate for future use.
Retain Connection on Smart Card Removal
Yesto retain the connection when a user removes a smart card containing a client certificate. Select
No(default) to terminate the connection when a user removes a smart card.
Allow Overriding Username from Client Certificate
Noto force GlobalProtect to use the username of the client certificate and prevent GlobalProtect from overriding it (enabled by default).
Enable Advanced View
Noto restrict the user interface on the app to the basic, minimum view (enabled by default).
Allow User to Dismiss Welcome Page
Noto force the Welcome Page to appear each time a user initiates a connection. This restriction prevents a user from dismissing important information, such as terms and conditions that may be required by your organization to maintain compliance.
Enable Rediscover Network Option
Noto prevent users from manually initiating a network rediscovery.
Enable Resubmit Host Profile Option
Noto prevent users from manually triggering resubmission of the latest HIP.
Allow User to Change Portal Address
Noto disable the
Portalfield on the
Hometab in the GlobalProtect app. However, because the user will then be unable to specify a portal to which to connect, you must supply the default portal address in the Windows registry or Mac plist:
For more information about pre-deploying the portal address, see Customizable App Settings in the GlobalProtect Administrator’s Guide.
Allow User to Continue with Invalid Portal Server Certificate
Noto prevent the app from establishing a connection with the portal if the portal certificate is not valid.
Display GlobalProtect Icon
Noto hide the GlobalProtect icon on the endpoint. If the icon is hidden, users cannot perform certain tasks, such as viewing troubleshooting information, changing passwords, rediscovering the network, or performing an on-demand connection. However, HIP notification messages, login prompts, and certificate dialogs do display when user interaction is necessary.
User Switch Tunnel Rename Timeout (sec)
Specify the number of seconds that a remote user has to be authenticated by a GlobalProtect gateway after logging into an endpoint by using Microsoft’s Remote Desktop Protocol (RDP) (range is 0 to 600; default is 0). Requiring the remote user to authenticate within a limited amount of time maintains security.
After authenticating the new user and switching the tunnel to the user, the gateway renames the tunnel.
A value of 0 means that the current user’s tunnel is not renamed but, instead, is immediately terminated. In this case, the remote user gets a new tunnel and has no time limit for authenticating to a gateway (other than the configured TCP timeout).
Pre-Logon Tunnel Rename Timeout (sec) (
This setting controls how GlobalProtect handles the pre-logon tunnel that connects an endpoint to the gateway.
A value of -1 means the pre-logon tunnel does not time out after a user logs on to the endpoint; GlobalProtect renames the tunnel to reassign it to the user. However, the tunnel persists even if the renaming fails or if the user does not log in to the GlobalProtect gateway.
A value of 0 means when the user logs on to the endpoint, GlobalProtect immediately terminates the pre-logon tunnel instead of renaming it. In this case, GlobalProtect initiates a new tunnel for the user instead of allowing the user to connect over the pre-logon tunnel. Typically, this setting is most useful when you set the
Pre-logon then On-demand, which forces the user to manually initiate the connection after the initial logon.
A value of 1 to 600 indicates the number of seconds in which the pre-logon tunnel can remain active after a user logs on to the endpoint. During this time, GlobalProtect enforces policies on the pre-logon tunnel. If the user authenticates with the GlobalProtect gateway within the timeout period, GlobalProtect reassigns the tunnel to the user. If the user does not authenticate with the GlobalProtect gateway before the timeout, GlobalProtect terminates the pre-logon tunnel.
Preserve Tunnel on User Logoff Timeout (sec)
To enable GlobalProtect to preserve the existing VPN tunnel after users log out of their endpoint, specify a
Preserve Tunnel on User Logoff Timeoutvalue (range is 0 to 600 seconds; default is 0 seconds). If you accept the default value of
0, GlobalProtect does not preserve the tunnel following user logout.
Show System Tray Notifications
Noto hide notifications from the user. Select
Yes(default) to display notifications in the system tray area.
Custom Password Expiration Message
LDAP Authentication Only)
Create a custom message to display to users when their password is about to expire. The maximum message length is 200 characters.
Automatically Use SSL When IPSec Is Unreliable (hours)
Specify the amount of time (in hours) during which you want the GlobalProtect app to
Automatically Use SSL When IPSec Is Unreliable(range is 0-168 hours). If you configure this option, the GlobalProtect app does not attempt to establish an IPSec tunnel during the specified time period. This timer initiates each time an IPSec tunnel goes down due to a tunnel keepalive timeout.
If you accept the default value of
0, the app does not fall back to establishing an SSL tunnel if it can establish an IPSec tunnel successfully. It falls back to establishing an SSL tunnel only when the IPSec tunnel cannot be established.
Connect with SSL Only
Specify whether you require users to connect to the GlobalProtect gateways using SSL instead of IPSec. The options are:
Maximum Internal Gateway Connection Attempts
Enter the maximum number of times the GlobalProtect agent should retry the connection to an internal gateway after the first attempt fails (range is 0 to 100; default is 0, which means the GlobalProtect app does not retry the connection). By increasing the value, you enable the app to automatically connect to an internal gateway that is temporarily down or unreachable during the first connection attempt but comes back up before the specified number of retries are exhausted. Increasing the value also ensures that the internal gateway receives the most up-to-date user and host information.
Portal Connection Timeout (sec)
The number of seconds (between 1 and 600) before a connection request to the portal times out due to no response from the portal. When your firewall is running Applications and Threats content versions earlier than 777-4484, the default is 30. Starting with Content Release version 777-4484, the default is 5.
TCP Connection Timeout (sec)
The number of seconds (between 1 and 600) before a TCP connection request times out due to unresponsiveness from either end of the connection. When your firewall is running Applications and Threats content versions earlier than 777-4484, the default is 60. Starting with Content Release version 777-4484, the default is 5.
TCP Receive Timeout (sec)
The number of seconds before a TCP connection times out due to the absence of some partial response of a TCP request (range is 1 to 600; default is 30).
Resolve All FQDNs Using DNS Servers Assigned by the Tunnel (
GlobalProtect 4.0.3 and later releases) Configure the DNS resolution preferences when the GlobalProtect tunnel is connected on Windows endpoints:
To configure DNS settings for GlobalProtect app 4.0.2 and earlier releases, use the
Update DNS Settings at Connectoption.
Update DNS Settings at Connect
Windows Only) (Deprecated)
GlobalProtect 4.0.2 and earlier releases) Configure the DNS server preferences for the GlobalProtect tunnel:
To configure DNS settings for GlobalProtect app 4.0.3 and later releases, use the
Resolve All FQDNs Using DNS Servers Assigned by the Tunneloption.
Detect Proxy for Each Connection
Noto auto-detect the proxy for the portal connection and use that proxy for subsequent connections. Select
Yes(default) to auto-detect the proxy at every connection.
Set Up Tunnel Over Proxy (
Windows & Mac Only)
Specify whether GlobalProtect must use or bypass proxies. Select
Noto require GlobalProtect to bypass proxies. Select
Yesto require GlobalProtect to use proxies. Based on the GlobalProtect proxy use, endpoint OS, and tunnel type, network traffic will behave differently.
Send HIP Report Immediately if Windows Security Center (WSC) State Changes
Noto prevent the GlobalProtect app from sending HIP data when the status of the Windows Security Center (WSC) changes. Select
Yes(default) to immediately send HIP data when the status of the WSC changes.
Enable Inbound Authentication Prompts from MFA Gateways
To support multi-factor authentication (MFA), a GlobalProtect endpoint must receive and acknowledge UDP prompts that are inbound from the gateway. Select
Yesto enable a GlobalProtect endpoint to receive and acknowledge the prompt. Select
No(default) for GlobalProtect to block UDP prompts from the gateway.
Network Port for Inbound Authentication Prompts (UDP)
Specifies the port number a GlobalProtect endpoint uses to receive inbound authentication prompts from MFA gateways. The default port is 4501. To change the port, specify a number from 1 to 65535.
Trusted MFA Gateways
Specifies the list of firewalls or authentication gateways a GlobalProtect endpoint trusts for multi-factor authentication. When a GlobalProtect endpoint receives a UDP message on the specified network port, GlobalProtect displays an authentication message only if the UDP prompt comes from a trusted gateway.
Inbound Authentication Message
Customize a notification message to display when users try to access a resource that requires additional authentication. When users try to access a resource that requires additional authentication, GlobalProtect receives a UDP packet containing the inbound authentication prompt and displays this message. The UDP packet also contains the URL for the Authentication Portal page you specify when you Configure Multi-Factor Authentication. GlobalProtect automatically appends the URL to the message. For example:
The message must be 255 or fewer characters.
Specifies the preferred protocol for GlobalProtect endpoint communications. Select
Noto change the preferred protocol to IPv4.Select Yes (default) to make IPv6 the preferred connection a dual-stack environment.
Change Password Message
Customize a message to specify password policies or requirements when users change their active directory (AD) password. For example:
The message must be 255 or fewer characters for two byte Unicode languages such as Chinese Simplified. For Japanese, the message must be 128 or fewer characters.
Display Status Panel at Startup (
Yesto automatically display the GlobalProtect status panel when users establish a connection for the first time. Select
Noto suppress the GlobalProtect status panel when users establish a connection for the first time.
Disable GlobalProtect App
Enter and then confirm a passcode if the setting for
Allow User to Disable GlobalProtect Appis
Allow with Passcode. Record and store the passcode in a secure place. You can distribute the passcode to new GlobalProtect users by email or post it in a support area of your company website.
If circumstances prevent the endpoint from establishing a VPN connection and this feature is enabled, a user can enter this passcode in the app interface to disable the GlobalProtect app and get Internet access without using the VPN.
Max Times User Can Disable
Specify the maximum number of times that a user can disable GlobalProtect before the user must connect to a firewall. The default value of 0 means users have no limit to the number of times they can disable the app.
Disable Timeout (min)
Specify the maximum number of minutes the GlobalProtect app can be disabled. After the specified time passes, the app tries to connect to the firewall. The default of 0 indicates that the disable period is unlimited.
Set a disable timeout value to restrict the amount of time for which users can disable the app. This ensures that GlobalProtect resumes and establishes the VPN when the timeout is over to secure the user and the user’s access to resources.
Uninstall GlobalProtect App
Enter and then confirm a password if the setting for
Allow User to Uninstall GlobalProtect Appis
Allow with Password. Record and store the password in a secure place.
Use this setting to prevent your users from uninstalling the GlobalProtect app. When configured, the user must enter this password on the GlobalProtect app interface to uninstall the GlobalProtect app.
Mobile Security Manager Settings
Mobile Security Manager
If you are using the GlobalProtect Mobile Security Manager for mobile device management (MDM), enter the IP address or FQDN of the device check‑in (enrollment) interface on the GP-100 appliance.
The port number the mobile endpoint should use when connecting to the GlobalProtect Mobile Security Manager for enrollment. The Mobile Security Manager listens on port 443 by default.
Keep this port number so that mobile endpoint users are not prompted for a client certificate during the enrollment process (other possible values are 443, 7443, and 8443).
Recommended For You
Recommended videos not found.