: Configure TACACS+ Authentication for a Dedicated Log Collector
Focus
Focus

Configure TACACS+ Authentication for a Dedicated Log Collector

Table of Contents

Configure TACACS+ Authentication for a Dedicated Log Collector

Configure TACACS+ authentication for a Dedicated Log Collector.
You can use a TACACS+ server to authenticate administrative access to the Dedicated Log Collector CLI. You can also define Vendor-Specific Attributes (VSAs) on the TACACS+ server to manage administrator authorization. Using VSAs enables you to quickly change the roles, access domains, and user groups of administrators through your directory service, which is often easier than reconfiguring settings on Panorama.
  1. Configure TACACS+ authentication.
    Only Superuser administrators are supported when configuring an administrative account for a Dedicated Log Collector. Remote, Local, or Panorama Administrators with any other admin role type is not supported.
    1. Add a TACACS+ server profile.
      The profile defines how the Dedicated Log Collector connects to the TACACS+ server.
      1. Select PanoramaServer ProfilesTACACS+ and Add a profile.
      2. Enter a Profile Name to identify the server profile.
      3. Enter a Timeout interval in seconds after which an authentication request times out (default is 3; range is 1–20).
      4. Select the Authentication Protocol (default is CHAP) that Panorama uses to authenticate to the TACACS+ server.
      5. Select CHAP if the TACACS+ server supports that protocol; it is more secure than PAP.
      6. Add each TACACS+ server and enter the following:
        1. Name to identify the server.
        2. TACACS+ Server IP address or FQDN.
        3. Secret/Confirm Secret (a key to encrypt usernames and passwords).
        4. Server Port for authentication requests (default is 49).
      7. Click OK to save the server profile.
    2. Assign the TACACS+ server profile to an authentication profile.
      The authentication profile defines authentication settings that are common to a set of administrators.
      1. Select PanoramaAuthentication Profile and Add a profile.
      2. Enter a Name to identify the profile.
      3. Set the Type to TACACS+.
      4. Select the Server Profile you configured.
      5. Select Retrieve user group from TACACS+ to collect user group information from VSAs defined on the TACACS+ server.
        Panorama matches the group information against the groups you specify in the Allow List of the authentication profile.
      6. Select Advanced and, in the Allow List, Add the administrators that are allowed to authenticate with this authentication profile.
      7. Click OK to save the authentication profile.
  2. Configure the authentication for the Dedicated Log Collector.
    1. Select PanoramaManaged Collectors and select the Dedicated Log Collector you previously added.
    2. Select the Authentication Profile you configured in the previous step.
      If a global authentication profile is not assigned you must assign an authentication profile to each individual local administrator to leverage remote authentication.
    3. Configure the authentication Timeout Configuration for the Dedicated Log Collector.
      1. Enter the number of Failed Attempts before a user is locked out of the Dedicated Log Collector CLI.
      2. Enter the Lockout Time, in minutes, for which the Dedicated Log Collector locks out a user account after that user reaches the configured number of Failed Attempts.
      3. Enter the Idle Timeout, in minutes, before the user account is automatically logged out due to inactivity.
      4. Enter the Max Session Count to set how many user accounts can simultaneously access the Dedicated Log Collector.
      5. Enter the Max Session Time the administrator can be logged in before being automatically logged out.
    4. Add the Dedicated Log Collector administrators.
      Administrators may either be added as a local administrator or as an imported Panorama administrator—but not both. Adding the same administrator as both a local administrator and as an imported Panorama administrator is not supported and causes the Panorama commit to fail. For example, the commit to Panorama fails if you add admin1 as both a local and Panorama administrator.
      1. Add and configure new administrators unique to the Dedicated Log Collector. These administrators are specific to the Dedicated Log Collector for which they are created and you manage these administrators from this table.
      2. Add any administrators configured on Panorama. These administrators are created on Panorama and imported to the Dedicated Log Collector.
    5. Click OK to save the Dedicated Log Collector authentication configuration.
  3. Commit and then Commit and Push your configuration changes.
  4. Log in to the Panorama CLI of the Dedicated Log Collector to verify you can successfully access the Dedicated Log Collector using the local admin user.