VM-Series and Panorama Plugins Release Notes
    : Features Introduced in SD-WAN Plugin 3.0
    Focus
    Download PDF
    Focus
    1. Home
    2. VM-Series and Panorama Plugins Release Notes
    3. Panorama Plugin for SD-WAN
    4. Panorama Plugin for SD-WAN 3.0
    5. Features Introduced in SD-WAN Plugin 3.0
    Download PDF

    VM-Series and Panorama Plugins Release Notes

    Features Introduced in SD-WAN Plugin 3.0

    Table of Contents

    Features Introduced in SD-WAN Plugin 3.0

    New features introduced in SD-WAN plugin 3.0 releases.
    The SD-WAN Administrator’s Guide 3.0 provides information about how to use the SD-WAN plugin features in this release.

    What's New in SD-WAN Plugin 3.0.8

    New FeatureDescription
    SD-WAN Plugin Improvements
    Earlier to SD-WAN plugin 3.0.8 version, the SD-WAN generated configurations (such as the IKE ID and tunnel names) uses the active firewall's serial number. Therefore, whenever a HA failover occurs, the SD-WAN generated configurations would reset with the active firewall's serial number that results in temporary tunnel flaps.
    We have improved the SD-WAN plugin 3.0.8 version by using the lower serial number among the HA devices for generating the SD-WAN configurations that remove tunnel flaps. This improvement also introduces the following SD-WAN configuration changes:
    • the IKE key ID is formed with the lower serial number between the HA devices.
    • the SD-WAN generated configurations, such as route table entry in virtual router, tunnel name, IKE gateway name, BGP import rule name, routing profile, BGP peer, and BGP filtering profile will be reset.
    • Tunnel names and corresponding IP address would change as the tunnel names are created from a lower serial number among the two HA devices.

    What's New in SD-WAN Plugin 3.0.7

    New FeatureDescription
    Multiple Virtual Routers Support on SD-WAN Hubs
    Supports multiple virtual routers on the SD-WAN hubs that enable you to have overlapping IP subnet addresses on branch devices connecting to the same SD-WAN hub. Multiple virtual routers can run multiple instances of routing protocols with a neighboring router with overlapping address spaces configured on different virtual router instances. Multiple virtual router deployments provide the flexibility to maintain multiple virtual routers, which are segregated for each virtual router instance.

    What's New in SD-WAN Plugin 3.0.6

    Key features introduced with the SD-WAN plugin 3.0.6 release:
    Bug and performance fixes.

    What's New in SD-WAN Plugin 3.0.5

    Key features introduced with the SD-WAN plugin 3.0.5 release:
    Bug and performance fixes.

    What's New in SD-WAN Plugin 3.0.4

    Key features introduced with the SD-WAN plugin 3.0.4 release:
    Bug and performance fixes.

    What’s New in SD-WAN Plugin 3.0.3

    Key features introduced with the SD-WAN plugin 3.0.3 release:
    Bug and performance fixes.

    What’s New in SD-WAN Plugin 3.0.2

    Key features introduced with the SD-WAN plugin 3.0.2 release:
    Bug and performance fixes.

    What’s New in SD-WAN Plugin 3.0.1

    Key features introduced with the SD-WAN plugin 3.0.1 release:
    New FeatureDescription
    Copy ToS Header Support
    SD-WAN hubs and branches allow you to automatically copy the ToS or Differentiated Services Code Point (DSCP) markings from the inner IPv4 header to the VPN header of packets so that traffic going through the VPN tunnel can preserve that information for QoS.

    What’s New in SD-WAN Plugin 3.0.0

    Key features introduced with the SD-WAN plugin 3.0.0 release:
    New FeatureDescription
    SD-WAN Plugin Upgrade
    Upgrade to the SD-WAN plugin to increase reliability. SD-WAN plugin 3.0 is required to upgrade to PAN-OS 10.2 and is only supported on PAN-OS 10.2 and later releases.

    © 2024 Palo Alto Networks, Inc. All rights reserved.