1. Home
    2. Prisma
    3. Prisma Access
    4. Prisma Access Insights
    5. Insights in Prisma Access
    6. First Look at Insights in Prisma Access
    7. The Time Range Selection Filter

    The Time Range Selection Filter

    The data displayed in most of the widgets is filtered based on the
    Time Range
     selected.
    The
    Time Range
     selection filter appears at the top of the Insights dashboards where you want to filter information by time range.
    The time is localized, so you can filter based on the local time for your region. Data is fetched every minute, but datapoints shown in most histograms vary according to the
    Time Range
     selected.
    For your convenience, Prisma Access Insights lets you pick the
    Time Range
     from a few predefined ranges or configure your own date and time range:
    • Last 15 min
      1 datapoint for every 3 minutes for a total of 5 datapoints.
    • Last 1 Hour
      1 datapoint for every 3 minutes for a total of 20 datapoints.
    • Last 3 Hours
      1 datapoint for every 3 minutes for a total of 60 datapoints.
    • Last 24 Hours
      1 datapoint for every 5 minutes for a total of 288 datapoints.
    • Last 7 Days
      1 datapoint for every 30 minutes for a total of 336 datapoints.
    • Last 30 Days
      1 datapoint for every 3 hours for a total of 180 datapoints.
    • Custom
      You can set a custom time interval (for example, date and the time example start at 5:00 pm on June 1 and end at 4:00 pm on June 2) in addition to the prepopulated
      Time Range
       selections available in the filter.
      To set a start time, first select the date in the calendar, then select the time under
      Start
      .
      Apply
       the start time, then set the end time by selecting an end date in the calendar and a time under
      End
      .
      Once you set a custom time range, it gets saved and applied across all widgets within Insights that use the time range filter to display data instead of real-time data.
      You can pick from prepopulated
      Time Range
       selections for custom time intervals:
      • Last 15 min
        1 datapoint every 3 minutes for a total of 5 datapoints.
      • Last 1 Hour
        1 datapoint every 3 minutes for a total of 20 datapoints.
      • Last 3 Hours
        1 datapoint every 3 minutes for a total of 60 datapoints.
      • Last 24 Hours
        1 datapoint every 5 minutes for a total of 288 datapoints.
      • Last 48 Hours
        1 datapoint every 30 minutes for a total of 96 datapoints.
      • Last 7 Days
        1 datapoint every 30 minutes for a total of 336 datapoints.
      • Last 30 Days
        1 datapoint every 3 hours for a total of 240 datapoints.

    Recommended For You

    Recommended Videos

    Recommended videos not found.

    © 2023 Palo Alto Networks, Inc. All rights reserved.

    Techdocs Logo