>
    CLI Commands in Prisma SD-WAN ION Device Release 6.0.2
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION Device Release 6-0
    5. CLI Commands in Prisma SD-WAN ION Release 6.0
    6. CLI Commands in Prisma SD-WAN ION Device Release 6.0.2
    Download PDF

    CLI Commands in Prisma SD-WAN ION Device Release 6.0.2

    Table of Contents

    CLI Commands in Prisma SD-WAN ION Device Release 6.0.2

    See the CLI commands introduced in Prisma SD-WAN ION device Release 6.0.2.
    See the new and updated device CLI commands in Prisma SD-WAN ION Device Release 6.0.2.
    CommandsDescription
    New
    clear switch mac-address-entries
    		Clears Layer 2 switch MAC address entries.
    config interface <id> lldp state=(rxonly or txrx)
    		Use the command to configure the LLDP state of the selected interface.
    config interface <id> poe enabled=true-usage-threshold 60
    		Use the command to enable and configure the PoE threshold of the selected interface. 
    config poe system usage-threshold 80
    		Use the command to configure PoE system usage threshold.
    debug poe interface <id> restart
    		Use the command to restart the PoE port using the toolkit commands.
    dump vlan member
    		Displays the VLAN members (switch ports).
    dump interface auth status interface=<id>
    		Displays the interface auth status.
    dump switch vlan-db
    		Displays the available VLANs on the switch and which members are part of the VLAN programmed in the device.
    dump switch port-status <id>
    		Displays the switch port status for a particular interface or all the interfaces.
    dump switch fdb vlan-id=<id>
    		Display the learned MAC address of the VLAN and switch ports.
    dump poe system status
    		Displays the PoE port status.
    dump poe system config
    		Displays the PoE system configurations.
    dump lldp status interface <id>
    		Displays the LLDP status of a selected interface or all the interfaces.
    dump lldp info interface  <id>
    		Displays the LLDP information of a selected interface or all interfaces.
    dump lldp config <all>
    		Displays the LLDP configuration of a selected interface or all the interfaces.
    dump lldp stats interface <id>
    		Displays the LLDP statistics of a selected interface or all interfaces.
    dump radius status
    		Displays the RADIUS server status.
    dump radius statistics interface=<id>
    		Displays the RADIUS server statistics of a selected interface or all interfaces.
    dump radius config
    		Displays the RADIUS server configuration.
    inspect interface stats <id>
    		Use the command to inspect a selected interface or all interfaces. 
    inspect interface stats <id> details
    		Use the command to inspect the selected interface.
    inspect switch mac-address-table
    		Use the command to inspect the MAC addresses on the switch port or VLAN.
    inspect interface stats <vlan-name>
    		Use the command to inspect the configured VLAN statistics.
    Updated
    dump interface config <id>
    		Displays the selected interface configurations.
    dump interface status <id>
    		Displays the selected interface status.

    © 2024 Palo Alto Networks, Inc. All rights reserved.