Use Groups in Network Policy Rules
Table of Contents
Use Groups in Network Policy Rules
4.0.0 PIC
Before you can use a Standard VPN in a policy rule, you need to have defined service
endpoint groups. Each group can have one or more Prisma SD-WAN data centers or
standard service endpoints. A group will be used in policy rules. The domain
defining the mappings for endpoints to groups must be assigned to a site for the
policy rules using the group to be effective. For more information, refer to
Managing Services and Data Center Groups. There can be four combinations of
Active/Backup groups that can be used in Policies. You may select just one Prisma
SD-WAN group or one non-Prisma SD-WAN group as an active or backup path in policies.
For example:
Active Group | Backup Group | Example |
|---|---|---|
Standard | Prisma SD-WAN | Internet-bound SSL traffic from a branch site will
transit through the Cloud Security Service. In the event all
standard VPN paths to any of the endpoints in the Primary Cloud
Security Service group are not available, internet-bound SSL traffic
will transit through one of the Prisma SD-WAN data center endpoints
assigned to that group via the Prisma SD-WAN VPN. |
Prisma SD-WAN | Standard | Internet-bound SSL traffic from a branch site will
transit through one of the Prisma SD-WAN data center endpoints
assigned to that group via the Prisma SD-WAN VPNs. In the event all
Prisma SD-WAN VPNs to all of the Data Center endpoints in that group
are unavailable, internet-bound SSL traffic will transit through the
Cloud Security Service via one of the standard VPN paths to any of
the endpoints in the standard group. |
Standard | Standard | Internet-bound SSL traffic from a branch site will
transit through the primary cloud security service via one of the
standard VPN paths to any of the endpoints in the primary cloud
security service group. In the event all standard VPNs are down to
all endpoints in the primary group, the Internet bound SSL traffic
will transit through the backup cloud security service via one of
the standard VPN paths to the endpoints that are part of the backup
group. |
Prisma SD-WAN | Prisma SD-WAN | Internet-bound SSL traffic from a branch site will
transit through one of the Prisma SD-WAN data center endpoints
assigned to the active group via the Prisma SD-WAN VPNs. In the
event all Prisma SD-WAN VPNs to all of those endpoints are down,
internet-bound SSL traffic will transit through one of the Prisma
SD-WAN data center endpoints assigned to the backup group via the
Prisma SD-WAN VPNs. |
- From the Prisma SD-WAN web interface, navigate to .
- Select .
- Select a Path Policy Set and an appropriate Path Policy rule.On the Paths tab, select Standard VPN as either an Active or Backup path.
You can mix Standard VPN with other available paths - private, public, direct or VPNs. - Navigate toService & DC Groups. Choose a group from either the Active or Backup drop-down lists.If standard VPN is used in a network policy, then you must have a standard Services and DC Group defined in the policy for the traffic to transit through that group. If not, traffic will be black-holed. If required is selected, traffic will always transit through the Services and DC Group. If not selected, traffic may or may not transit through the Services and DC Group per policy.
- Save & Exitto save the policy rule.