Focus

Prisma SD-WAN Administrator’s Guide

Verify Standard VPN Endpoints

Table of Contents

Verify Standard VPN Endpoints

Learn how to verify the standard VPN endpoints in Prisma SD-WAN.

Where Can I Use This?	What Do I Need?
Strata Cloud Manager	Prisma SD-WAN Active Prisma SD-WAN license Prisma SD-WAN AppFabric deployed at one or more locations. Physical and/or virtual ION devices running software versions 5.6.X or higher. Prisma Access Cloud Managed Prisma Access with Aggregate Bandwidth; the bandwidth licensing mode must be enabled per compute location on the Prisma Access Cloud Managed portal. Identification of the IPSec Termination Nodes within Prisma Access for connectivity. Ensure that you have Prisma Access (Cloud Managed) and Prisma SD-WAN in the same TSG.

Where Can I Use This?

What Do I Need?

Strata Cloud Manager

Prisma SD-WAN
- Active Prisma SD-WAN license
- Prisma SD-WAN AppFabric deployed at one or more locations.
- Physical and/or virtual ION devices running software versions 5.6.X or higher.
Prisma Access Cloud Managed
- Prisma Access with Aggregate Bandwidth; the bandwidth licensing mode must be enabled per compute location on the Prisma Access Cloud Managed portal.
- Identification of the IPSec Termination Nodes within Prisma Access for connectivity.
Ensure that you have Prisma Access (Cloud Managed) and Prisma SD-WAN in the same TSG.

With the native integration of Prisma SD-WAN with Prisma Access, Standard Endpoints for all Prisma Access regions will be created automatically. In addition, each of the endpoints will be configured with a Liveliness probe to the Prisma Access Firewall monitor address. The monitor will run an ICMP check every ten (10) seconds and mark the tunnel as failed after three (3) consecutive failures. The only action required will be to add these Endpoints to Groups and Domains.

Understand Service and Data Center Groups

Configure Standard Groups