Switch Layer 2/Layer 3 Change Mode
Table of Contents
Switch Layer 2/Layer 3 Change Mode
Lets see how to switch or edit the switch configurations for ION 1200-S and ION 3200
devices in Prisma SD-WAN netsec.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
The integrated Layer 2 switch ports enable you to connect multiple devices directly
on the L2 LAN or add downstream switches or Wireless Access Points (WAP). L2 LAN
switch ports is supported on ION 3200 on ports 5 -10. When the ION 3200 device is
running in L2 mode, it will function as ION 1200-S, and when the ION 3200 is running
in L3 mode, it will serve as the current ION 3200 device.
- Select and select the ION 3200 device you wish to configure.
![]()
On the Basic Info, click the ellipsis menu and select L2 to L3 to switch the Device Mode from L2 to L3 or vice versa.On the screen you get the below pop-up to proceed with the change, click Proceed to continue the change port.![]()
See the Device Mode change from what you intended to switch (L2 to L3 or L3 to L2).![]()
The mode change operation is allowed when the device is in a claimed state; it is not allowed in unclaimed or assigned or any other states. Also, when the device is declaimed or unclaimed, it returns to L3 mode. Only two retries will be allowed per device, each spaced out by 15 minutes from the start time of the change mode process.
