>
    inspect flow-arp
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Use CLI Commands
    5. Inspect Commands
    6. inspect flow-arp
    Download PDF

    inspect flow-arp

    Table of Contents

    inspect flow-arp

    Use the inspect flow-arp command to inspect the address resolution protocol (ARP) entries used and recorded by the flow controller (FC) module. The ARP cache is displayed for all interfaces or a specific interface filtered by either interface name, VLAN ID, Host IP or Gateway ID.

    Command

    inspect flow-arp ( all | interface = interface | vlan= vlan_id | host= host_ip_address | gateway= gateway_id )

    Options

    allEnter all to inspect data plane ARP cache for all interfaces.
    interfaceEnter the interface name to inspect data plane ARP cache for an interface.
    vlanEnter the VLAN ID to inspect data plane ARP cache for a VLAN.
    hostEnter the host IP address to inspect data plane ARP cache for a host.
    gatewayEnter the gateway ID to inspect data plane ARP cache for a gateway.

    Command Notes

    RoleSuper, Read Only
    Related Commands
    inspect system arp
    Introduced in Release 4.5.1

    Example

    inspect flow-arp all
				ifname device vlan_id host mac gateway arp_eth_addr router_arp_srcrouter valid expired expire_secslan 1 eth11 10 10.10.10.9 ec:b9:07:00:0f:c2 10.10.10.10 True True
				False True False 1215
				wan 1 eth10 220 220.220.220.1 00:50:56:a7:1d:9a 220.220.220.1 True
				False True True False 315359408
				wan 1 eth10 10 10.10.10.10 00:50:56:a7:71:8c 10.10.10.10 True
				False True True False 315359406
				wan 1 eth10 35 35.35.35.1 00:50:56:a7:24:02 35.35.35.1 True False
				True True False 315359408
				wan 1 eth10 110 110.110.110.15 00:50:56:a7:62:19 110.110.110.1
				True False False True False 1207

    © 2024 Palo Alto Networks, Inc. All rights reserved.