Create a static route for SD-WAN traffic.
In addition to (or as an alternative to) BGP
routing, you can create static routes to route your SD-WAN traffic.
You
can configure static routes either using Panorama™ or directly on
the firewall hub or branch. If you are going to use Panorama, you should
be familiar with the process to
Configure a Template or Template
Stack Variable. You will create a variable to use as the destination
in your static route, as shown in the following procedure. You will
push a static route (that goes to the hub) to the branch. You will push
a static route (that goes to the branch) to the hub.