Create a Default Route to the SD-WAN Interface

Create a default route to an SD-WAN interface you created in order to bring up the firewall.

If you are using a service route to access Panorama™, to bring up the firewall you must create a default route that points to an SD-WAN interface you created.

Auto VPN creates a virtual SD-WAN interface named sdwan.901 for DIA and creates a virtual SD-WAN interface named sdwan.902 for VPN tunnels. Auto VPN also creates its own default route that uses the sdwan.901 interface as its egress interface and uses a low metric, so that the sdwan.901 interface is preferred over the default route you created.

Select the

Template

you are working on.

Select

Network

Virtual Routers

and select a virtual router, such as

sd-wan

Select

Static Routes

and

Add

a static route by

Name

For

Destination

, enter 0.0.0.0/0.

For egress

Interface

, select one of the logical SD-WAN interfaces you created to bring up the firewall, such as sdwan.1.

The egress interface you select can be any logical SD-WAN interface except sdwan.901 or sdwan.902.

For

Next Hop

, select

None

For

Metric

, enter a value greater than 50, so that this default route is not preferred over the default route that Auto VPN creates with a low metric.

Click

Select

Commit

and

Commit and Push

your configuration changes.

Commit

your changes.

Repeat this task for other templates on firewalls that use a service route to access Panorama.

Document:SD-WAN Administrator’s Guide

Create a Default Route to the SD-WAN Interface

Create a Default Route to the SD-WAN Interface

Recommended For You

Document:SD-WAN Administrator’s Guide

Create a Default Route to the SD-WAN Interface

Create a Default Route to the SD-WAN Interface

Recommended For You

Recommended Videos