Create a Default Route to the SD-WAN Interface
Expand all | Collapse all
Create a Default Route to the SD-WAN Interface
Create a default route to an SD-WAN interface you created
in order to bring up the firewall.
If you are using a service route to access
Panorama™, to bring up the firewall you must create a default route
that points to an SD-WAN interface you created.
Auto VPN creates
a virtual SD-WAN interface named sdwan.901 for DIA and creates a
virtual SD-WAN interface named sdwan.902 for VPN tunnels. Auto VPN
also creates its own default route that uses the sdwan.901 interface
as its egress interface and uses a low metric, so that the sdwan.901
interface is preferred over the default route you created.
Select the
Template
you are working
on.
Select and select
a virtual router, such as
sd-wan
.
Select
Static Routes
and
Add
a
static route by
Name
.
For
Destination
, enter 0.0.0.0/0.
For egress
Interface
, select one of the logical SD-WAN
interfaces you created to bring up the firewall.
The egress interface you select can be any logical SD-WAN interface
except sdwan.901 or sdwan.902.
For
Next Hop
, select
None
.
For
Metric
, enter a value greater
than 50, so that this default route is not preferred over the default
route that Auto VPN creates with a low metric.
Select
Commit
and
Commit
and Push
your configuration changes.
Repeat this task for other templates on firewalls that
use a service route to access Panorama.