VM-Series Deployment Guide
    : Use the Post Rulebase to Define NSX-T Steering Rules
    Focus
    Download PDF
    Focus
    1. Home
    2. VM-Series
    3. VM-Series Deployment Guide
    4. Set Up the VM-Series Firewall on VMware NSX-T
    5. Set Up the VM-Series Firewall on NSX-T (East-West)
    6. Deploy the VM-Series Using the Security-Centric Workflow
    7. Create Security Policies
    8. Use the Post Rulebase to Define NSX-T Steering Rules
    Download PDF

    VM-Series Deployment Guide

    Use the Post Rulebase to Define NSX-T Steering Rules

    Table of Contents

    Use the Post Rulebase to Define NSX-T Steering Rules

    1. Create security rules.
      1. In Panorama, select PoliciesSecurityPost Rules.
      2. Verify that you are configuring the security rules in a device group associated with an NSX-T service definition.
      3. Click on the name of a security rule to edit.
      4. Set the Rule Type to intrazone (Devices with PAN-OS 6.1 or later).
      5. In the Source tab, set the source zone to the zone from the template stack associated with the service definition. Then select a dynamic address group you created previously as the Source Address. Do not add any static address groups, IP ranges, or netmasks as a Source Address.
      6. In the Destination tab, Panorama does not allow you to set a destination zone because you set the rule type to intrazone. Then select a dynamic address group you created previously as the Destination Address. Do not add any static address groups, IP ranges, or netmasks as a Destination Address.
      7. Click OK.
      8. Repeat steps 1 through 7 for each steering rule you require.
    2. Commit your changes to Panorama.
    3. Apply Security Policies to the VM-Series Firewall on NSX-T (East-West).

    © 2024 Palo Alto Networks, Inc. All rights reserved.