The
port
. On each controller
node, configure the port to use for the
ha1
interface
and the port to use for the
ha-backup
interface.
You can use
eth2
,
eth3
,
or the
management
port (eth0) for the
HA control link interfaces. You cannot use the Analysis Environment
Network interface (eth1) as an
ha1
or
ha1-backup
control
link interface. Use the same interface on both HA peers as the
ha1
interface,
and use the same interface (but not the
ha1
interface)
on both HA peers as the
ha1-backup
interface.
For example, configure
eth3
as the
ha1
interface
on both controller nodes and configure the
management
interface as
the
ha1-backup
interface on both controller
nodes.