Configure Controller Port
Configure the controller port to communicate with the
Prisma SD-WAN controller.
The
Prisma SD-WAN ION 9000 uses the controller
port to communicate with
Prisma SD-WAN controller. By default, the
controller port is configured for DHCP. However, if you want to
set a static IP or if there are no DHCP-enabled networks, access
the console and set a
static IP on Controller 1.
Connect the controller 1 port to a copper 1G ethernet port, similar
to how client PC or Laptops are connected to a corporate network.
Ensure that you allow outbound internet access on port 443 to enable communication
between the controller port and the Prisma SD-WAN controller service.
After this, the port is connected and the ION 9000 powered on,
the ION 9000 automatically connects and registers with the Prisma
SD-WAN controller. After the registration, the ION 9000 is available
for claiming and configuration in the Prisma SD-WAN console.
