Device Security
Integrate Device Security with Aruba AirWave
Table of Contents
Expand All
|
Collapse All
Device Security Docs
Integrate Device Security with Aruba AirWave
Integrate Device Security through Cortex XSOAR with Aruba AirWave.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
One of the following subscriptions:
One of the following Cortex XSOAR setups:
|
Aruba AirWave manages campus networks and uses VisualRF to
create and manage floor plans and provision access points (APs). When you integrate
Device Security with Aruba AirWave, Device Security can learn more
information about devices from VisualRF, such as their physical location.
This helps when troubleshooting requires locating a device for physical access.
Device Security retrieves floor plan maps and imports client information from
Aruba AirWave.
Through the integration, Aruba AirWave sends the following information
through Cortex XSOAR to Device Security:
- Access points, as well as their locations and SSIDs
- A device's most recent access point
- The physical location for devices, such as site, building, and floor
- The VLAN that a device is assigned to
When Device Security receives information for devices already in its inventory, it
incorporates any additional information from Aruba AirWave into the data
it previously gathered from network traffic and behavior analysis. Data that
Device Security already has supersedes duplicate or conflicting data from
Aruba AirWave. For all other types of data, whatever is the most recent
takes precedence, regardless of its source. For devices that aren't already in the
Device Security inventory, Device Security creates new entries with the data that
Aruba AirWave provides.
Integrating with Aruba AirWave requires either a
full-featured Cortex XSOAR™ server
or the
activation of a Device Security
free
cohosted Cortex XSOAR instance.