: Put a Device in Quarantine Using Aruba ClearPass
Focus
Focus

Put a Device in Quarantine Using Aruba ClearPass

Table of Contents

Put a Device in Quarantine Using Aruba ClearPass

Use
IoT Security
integration with Aruba ClearPass to quarantine devices of concern.
If you want to quarantine a device because you saw an alert that concerns you, use the quarantine option on the
Alerts
Security Alerts
page. You can also do this in the Action menu in the Alerts section on a Device Details page.
  1. Select an alert on
    Alerts
    Security Alerts
    in the IoT Security portal.
  2. Click
    More
    Send to
    Quarantine via Aruba ClearPass
    .
  3. Add a comment.
    After you enter a comment, the Send button changes from gray to blue, indicating that you can proceed.
  4. Click
    Send
    .
    IoT Security
    sends a command through
    Cortex XSOAR
    to all configured Aruba ClearPass instances to assign the device to a quarantine VLAN. The instance or instances that have an endpoint with a matching MAC address apply the quarantine. The device remains in quarantine while you investigate the cause of the alert. Once it’s resolved, you can then use the Release via Aruba ClearPass option.
    After you click
    Send
    , a link appears. When you click it, a new browser window opens to the XSOAR playbook for this action.
    To confirm that the quarantine command was sent, click the link to the XSOAR playbook for this action.
    For the link in
    IoT Security
    to open the corresponding playbook in
    Cortex XSOAR
    , you must already be logged in to your XSOAR instance before clicking it.
    The green boxes in the playbook indicate that a particular step was successfully performed. Following the path through the playbook gives you feedback about whether an action was carried out successfully or, if not, where the process changed course.

Recommended For You