>
    Panorama > VMware NSX
    Focus
    Focus
    1. Home
    2. Next-Generation Firewall
    3. Panorama Web Interface
    4. Panorama > VMware NSX
    Next-Generation Firewall

    Panorama > VMware NSX

    Table of Contents

    Panorama > VMware NSX

    To automate the provisioning of a VM-Series NSX edition firewall, you must enable communication between the NSX Manager and Panorama. When Panorama registers the VM-Series firewall as a service on the NSX Manager, the NSX Manager has the configuration settings required to provision one or more instances of the VM‑Series firewalls on each ESXi host in the cluster.
    What do you want to know?
    See:
    How do I configure a Notify Group?
    Configure a Notify Group
    How do I define the configuration for the VM-Series NSX edition firewall?
    Create Service Definitions
    How do I configure Panorama to communicate with the NSX Manager?
    Configure Access to the NSX Manager
    How do I define steering rules for the VM-Series NSX edition firewall?
    Create Steering Rules
    How do I configure the firewall to consistently enforce policy in the dynamic vSphere environment?
    Select Objects > Address Groups and Policies > Security
    To enable Panorama and the firewalls to learn about the changes in the virtual environment, use Dynamic Address Groups as source and destination address objects in Security policy pre rules.
    Looking for more?
    See Set up a VM-Series NSX Edition Firewall

    © 2025 Palo Alto Networks, Inc. All rights reserved.