>
    Cluster Config
    Focus
    Download PDF
    Focus
    1. Home
    2. Next-Generation Firewall
    3. Device
    4. Device > High Availability
    5. Cluster Config
    Download PDF
    Next-Generation Firewall

    Cluster Config

    Table of Contents

    Cluster Config

    Add members of an HA cluster.
    • Device > High Availability > Cluster Config
    Add members to an HA cluster by selecting DeviceHigh AvailabilityCluster Config.
    Cluster Config
    Description
    Add
    Add a cluster member. You must add the local firewall and if you are using HA pairs, you must add both HA peers of the pair as cluster members.
    • (Supported firewalls) Device Serial Number—Enter the unique serial number of the cluster member.
    • (Panorama) Device—Select a device from the dropdown and enter a Device Name.
    • HA4 IP Address—Enter the IP address of the HA4 link for the cluster member.
    • HA4 Backup IP Address—Enter the IP address of the backup HA4 link for the cluster member.
    • Session Synchronization—Select to enable session synchronization with this cluster member.
    • Description—Enter helpful description.
    Delete
    Select one or more cluster members and Delete them from the cluster.
    Enable
    (Supported firewalls) You can determine whether or not a cluster member synchronizes sessions with other members. By default, all members are allowed to synchronize sessions. If you disable synchronization for one or more members, select Enable to re-enable synchronization for one or more members.
    Disable
    (Supported firewalls) Select one or more members and Disable synchronization with other members.
    Refresh
    (Panorama) Select Refresh to refresh the list of HA devices in the HA cluster.

    © 2025 Palo Alto Networks, Inc. All rights reserved.