OpenConfig Telemetry on PAN-OS
Table of Contents
OpenConfig Telemetry on PAN-OS
Basics of Telemetry using the OpenConfig plugin on PAN-OS.
The PAN-OS OpenConfig plugin supports
telemetry streaming with the gNMI Subscribe request. The Subscribe
request support the following modes:
- Once.
- Poll.
- Stream.
The streaming mode supports 3 different subtypes.
- On-Change
- Target Defined
- Sample
The time difference in the examples displays how you can expect
each of the subscription types to react to your requests.
Once
Similar to a Get request, a Once
subscription returns a singular response. The request creates a
single channel to submit and receive the relevant updates then closes
the RPC channel.
gnmic -u username -p password --tls-ca $CA-CERT --tls-cert $CIENT_CERT --tls-key $ CIENT_KEY -a 10.1.1.1:9339 sub --path "/interfaces/interface[name=*]"/state/oper-status --mode once -e JSON_IETF
An example response shows a one-time snapshot
of the interface using the Once type of subscribe request:
{ "source": "10.1.1.1:9339", "subscription-name": "default", "timestamp": 1614649807, "time": "1969-12-31T16:00:01.614649807-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "UP" } }, { "Path": "interfaces/interface[name=ethernet1/2]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } }, { "Path": "interfaces/interface[name=ethernet1/3]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } } ] }
Poll
Poll methods create a long-lived
RPC connection that can subscribe to a number of paths. Once you
send a poll message. The response returns the data requested. While
the connection is still alive, the client can send periodic poll
requests to retrieve relevant data.
gnmic -u username -p password --tls-ca $CA-CERT --tls-cert $CIENT_CERT --tls-key $ CIENT_KEY -a 10.1.1.1:9339 sub --path "/interfaces/interface[name=*]"/state/oper-status --mode poll -e JSON_IETF
The response shows two responses in a non-standard
interval time setting based on when the empty poll message is sent.
{ "timestamp": 1614648989, "time": "1969-12-31T16:00:01.614648989-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "UP" } }, { "Path": "interfaces/interface[name=ethernet1/2]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } }, { "Path": "interfaces/interface[name=ethernet1/3]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } } ] }
Both of these responses above and below
happen using the same request. The response also includes a
received
sync response 'true' from '10.1.1.1:9339'
to acknowledge
the subscription is still alive. { "timestamp": 1614649617, "time": "1969-12-31T16:00:01.614649617-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/3]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } }, { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } }, { "Path": "interfaces/interface[name=ethernet1/2]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } } ] }
Stream
The streaming subtypes provide
a continuous flow of telemetry data based on the specified subtype.
Review each of the sections for the subtypes to familiarize yourself
with the various streaming types.
Sample and Target Defined
The Sample method
must include the
--sample-interval
along with the
interval in seconds. Alternatively, you can use --target_defined
.
The lowest accepted interval is 5 seconds. gnmic -u username -p password --tls-ca $CA-CERT --tls-cert $CIENT_CERT --tls-key $ CIENT_KEY -a 10.1.1.1:9339 sub --path "/interfaces/interface[name=*]"/state/oper-status --mode stream --stream-mode sample --sample-interval 10s -e JSON_IETF
The responses:
{ "source": "10.1.1.1:9339", "subscription-name": "default", "timestamp": 1614650100, "time": "1969-12-31T16:00:01.6146501-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } } ] } { "source": "10.1.1.1:9339", "subscription-name": "default", "timestamp": 1614650110, "time": "1969-12-31T16:00:01.61465011-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } } ] } { "source": "10.1.1.1:9339", "subscription-name": "default", "timestamp": 1614650120, "time": "1969-12-31T16:00:01.61465012-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "UP" } } ] }
On Change
On change updates are only sent
upon the update of data for a specified path.
gnmic -u username -p password --tls-ca $CA-CERT --tls-cert $CIENT_CERT --tls-key $ CIENT_KEY -a 10.1.1.1:9339 sub --path "/interfaces/interface[name=*]"/state/description --mode stream --stream-mode on_change -e JSON_IETF
The firewall responds when the oper-status changes
to down:
{ "source": "10.1.1.1:9339", "subscription-name": "default", "timestamp": 1614650238, "time": "1969-12-31T16:00:01.614650238-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "UP" } } ] } { "source": "10.1.1.1:9339", "subscription-name": "default", "timestamp": 1614650294, "time": "1969-12-31T16:00:01.614650294-08:00", "updates": [ { "Path": "interfaces/interface[name=ethernet1/1]/state/oper-status", "values": { "interfaces/interface/state/oper-status": "DOWN" } } ] }
