Fixed an issue where an incorrect regex
key was generated to invalidate the completions cache, which caused
the configd process to stop responding.
PAN-195181
Added enhancements to improve the load on
the pan_comm process during SNMP polling.
PAN-194826
(
WF-500 and WF-500-B appliances only
) Fixed
an issue where log system forwarding did not work over a TLS connection.
PAN-194776
Fixed an issue on Amazon Web Services (AWS) Gateway
Load Balancer (GWLB) deployments with overlay routing enabled where
intra-zone packets were re-encapsulated with the incorrect source/destination
MAC address.
PAN-194721
Fixed an issue where path monitor failure
occurred, which caused slots to go down.
PAN-194694
Fixed an issue where multiple SNMP requests
being made to the firewall caused in the pan_comm process
to stop responding.
PAN-194645
(
PA-5400 Series firewalls only
)
Fixed an issue where the Data Processing Card status was incorrectly
shown as
config=None
PAN-194601
Fixed an issue that caused the all_task process
to stop responding.
PAN-194406
Fixed an issue where the MTU from SD-WAN interfaces
was recalculated after a configuration push from Panorama or a local
commit, which caused traffic disruption.
PAN-194097
Fixed an issue on firewalls in high availability
(HA) active/passive configurations where
_ha_d_session_msgbuf
overflowed
on the passive firewall during an upgrade, which caused the firewall
to enter a non-functional state.
PAN-193732
(
PA-5400 Series firewalls only
)
Fixed an issue where the firewall incorrectly handled internal transactions.
PAN-193184
Fixed an issue where
IP-user-mapping
disappeared when
login/logout events occurred at the same timestamp.
PAN-193132
(
PA-220 firewalls only
) Fixed an
issue where a commit and push from Panorama caused high dataplane
CPU utilization.
)
Fixed an issue where files failed to upload to the Wildfire public cloud.
PAN-192673
(
PA-7050-SMC-B firewalls only
)
Fixed an issue where the LFC (log forwarding card) syslog-ng service failed
to start after an upgrade.
PAN-192551
(
PA-5400 Series firewalls only
)
Fixed an issue where the firewall incorrectly processed path monitoring
packets, which caused a slot restart.
PAN-192052
Fixed an issue where, when next hop MAC
address entries weren't found on the offload processor for active traffic,
update messages flooded the firewall, which caused resource contention
and traffic disruption.
PAN-182951
Fixed an issue where commits remained at
98% for an hour and then failed.
PAN-173469
Fixed an intermittent issue where websites
were blocked and categorized as not resolved.
