Fixed an issue where port pause frame settings
did not work as expected and incorrect pause frames occurred.
PAN-208718
Additional debug information was added to
capture internal details during traffic congestion.
PAN-206658
Fixed a timeout issue in the Intel ixgbe driver
that resulted in internal path monitoring failure.
PAN-206251
(PA-7000 Series firewalls with Log Forwarding
Cards (LFCs) only) Fixed an issue where the logrcvr process did
not send the system-start SNMP trap
during startup.
PAN-205735
Fixed an issue where the mgmtsrvr process stopped
responding, which caused the Panorama web interface to become inaccessible
and return a 504 Gateway Not Reachable page.
PAN-205030
Fixed an issue where, when a session hit
policy based forwarding with symmetric return enabled was not offloaded,
the firewall received excessive return-mac update messages, which
resulted in resource contention and traffic disruption.
PAN-204335
Fixed an issue where Panorama became unresponsive,
and when refreshed, the error 504 Gateway not Reachable was
displayed.
PAN-203851
Fixed an issue with firewalls in high availability
(HA) configurations where host information profile (HIP) sync did
not work between the active primary firewall and the active secondary
firewall.
PAN-203653
Fixed an issue where dynamic updates were
completed even when configuration commits failed, which caused the all_task process
to stop responding.
PAN-203453
Fixed an issue on Panorama where the log
query failed due to a high number of User-ID redistribution messages.
PAN-203402
Fixed an intermittent issue where forward
session installs were delayed, which resulted in latencies.
PAN-203244
Fixed a path monitoring issue that caused
traffic degradation.
PAN-202783
(PA-7000 Series firewalls with 100G
NPC (Network Processing Cards) only) Fixed an issue where sudden,
large bursts of traffic destined for an interface that was down
caused packet buffers to fill, which stalled path monitor heartbeat
packets.
PAN-202544
An enhancement was made to collect CPLD
register data after a path monitor failure.
PAN-202543
An enhancement was made to improve path
monitor data collection by verifying the status of the control network.
PAN-202535
Fixed an issue where the Device Telemetry
configuration for a region was unable to be set or edited via the
web interface.
PAN-202361
Fixed an issue where packets queued to the pan_task process
were still transmitted when the process was not responding.
PAN-202101
Fixed an issue where firewalls stopped responding
after an upgrade due to configuration corruption.
PAN-202012
A debug command was introduced to control
Gzip encoding for the GlobalProtect Clientless VPN application.
PAN-201900
Fixed an internal path monitoring failure
issue that caused the dataplane to go down.
PAN-201858
Fixed an issue where the SD-WAN interface
Maximum Transmission Unit (MTU) led to incorrect fragmentation of
IPSec traffic.
PAN-201627
Fixed an issue in next-generation firewall
deployments where, when SD-WAN was configured, the dataplane restarted
if all SD-WAN member links were down due to an out-of-memory (OOM)
condition or during a reboot when all SD-WAN tunnels were down.
PAN-198718
(PA-5280 firewalls only) Fixed
an issue where memory allocation failures caused increased decryption
failures.
PAN-197582
Fixed an issue where, after upgrading to
PAN-OS 10.1.6, the firewall reset SSL connections that used policy-based
forwarding.
PAN-196261
Fixed an issue where inter-lc disconnected
once every minute in the system logs.
PAN-194704
Fixed an issue with SIP ALG where improper
NAT was applied when Destination NAT ran out of IP addresses.
PAN-194068
(PA-5200 Series firewalls only)
Fixed an issue where the firewall unexpectedly rebooted with the
log message Heartbeat failed previously.
PAN-193928
Fixed an intermittent issue where GlobalProtect
logs were not visible under device groups (Mobile_User_Device_Group).
PAN-192456
Fixed an issue where GlobalProtect SSL VPN
processing during a high traffic load caused the dataplane to stop
responding.
PAN-191408
Fixed an issue where the firewall did not
correctly receive dynamic address group information from Panorama
after a reboot or initial connection.
PAN-184766
(PA-5450 firewalls only) Fixed
an issue where the control packets for BGP, OSPF, and Bidirectional
Forwarding Detection (BFD) were not assigned a QoS value of 5.
PAN-183757
(PA-5200 Series and PA-7000 Series firewalls
only) Fixed an issue where uneven distribution of sessions
caused packet latency.
PAN-172452
Fixed an issue where the log file did not
include all logs.
PAN-171143
Fixed an issue where tech support files
didn't collected DP3 logs.
PAN-167288
Fixed an issue with the pan_task process
that caused the queue to build up.
