>
    Strata Copilot
    PAN-OS 11.2.7-h8 Addressed Issues
    Focus
    Download PDF
    Focus
    1. Home
    2. PAN-OS
    3. PAN-OS 11.2.7 Known and Addressed Issues
    4. PAN-OS 11.2.7-h8 Addressed Issues
    Download PDF

    PAN-OS 11.2.7-h8 Addressed Issues

    Table of Contents

    PAN-OS 11.2.7-h8 Addressed Issues

    PAN-OS® 11.2.7-h8 addressed issues.
    Issue ID
    Description
    PAN-308727
    Fixed an issue where traffic logs for Remote Networks displayed the source zone as trust instead of the remote network name.
    PAN-308468
    Fixed an issue where the firewall rebooted due to the all_task process restarting.
    PAN-303051
    Fixed an issue on Panorama where a memory leak occurred related to the reportd process due to retaining memory that was temporarily used for report generation instead of releasing the memory for reuse, which resulted in continuous accumulation and memory exhaustion.
    PAN-302927
    Fixed an issue where, after upgrading Panorama, the Push to Devices option did not display selected devices, and the OK and Cancel buttons did not function as expected. Selecting OK did not close the window, and selecting Cancel returned to the main push screen with the push selected devices displaying as empty. Despite this, selecting Push or Validate Device Group Push still pushed to the previously canceled, non-displayed devices.
    PAN-301801
    Fixed an issue on Log Collectors where the Elasticsearch process fluctuated intermittently between green and red states, which led to interruptions in log collection. This issue occurred when the number of shards exceeded the cluster's maximum supported threshold of greater than 1000 shards per Elasticsearch instance.
    PAN-301691
    Fixed an issue where BGP stopped responding with the error message Too many open files when pushing 1000 eBGP (External BGP) neighbor configurations. With this fix, the number of file descriptors for the BGP process is increased from 1024 to 8192.
    PAN-301456
    Fixed an issue on Panorama where the debug system reset-ztp CLI command was unavailable.
    PAN-300216
    Fixed an issue where, when SD-WAN Direct Internet Access was configured and traffic traversed the cellular interface without a NAT policy rule, intermittent cellular modem connectivity issues occurred, which caused the firewall to disconnect and reconnect to the cellular network.
    To use this fix, run the CLI command set session teardown-upon-fwd-zonechange yes.
    PAN-300138
    Fixed an issue where DNS queries stalled or repeatedly time out due to multiple DNS responses with different CNAME values causing evasion false positive alerts.
    PAN-299772
    (VM-Series firewalls in active/passive configurations only) Fixed an issue where, after an HA failover event, the newly active firewall DHCP client interfaces failed to obtain IP addresses automatically. This occurred because the DHCP client processes did not initiate the necessary DHCP discover or renew requests
    PAN-297976
    Fixed an issue where the firewall experienced extended boot times after a reboot due to the configd process needing to rebuild the ACE catalog after detecting discrepancies that were caused by duplicate application checking between the ACE catalog and content.
    PAN-297610
    Fixed an issue where the firewall became unresponsive after an upgrade due to the fsck command scanning drive partitions in parallel with the root partition, which caused the process to take an extended amount of time.
    PAN-297005
    Fixed an issue where exporting custom reports resulted in empty CSV files.
    PAN-296977
    Fixed an issue where the web interface became unresponsive when attempting to view Ethernet interface details after applying a filter in NetworkInterfaces
    PAN-296752
    (PA-1410 Firewalls only) Fixed an issue where the firewall experienced high management CPU usage and repeatedly rebooted when attempting to retrieve SMART data.
    PAN-296694
    Fixed an issue where the firewall rebooted due to the useridd process repeatedly restarting during an IP-port data type writes to the redis from multiple sources such as TSA or XML in a scale environment.
    PAN-296535
    Fixed an issue on the firewall where BGP peers disconnected when more than 500 BGP neighbors were configured in a single Logical Router
    PAN-295899
    Fixed an issue where DNS resolution failed on Linux machines running GlobalProtect client version 6.2.6 when connected with DNS Security enabled. This occurred because the firewall incorrectly discarded DNS packets when processing multiple DNS requests or responses over the same session, even when no malicious verdict was received.
    PAN-295342
    Fixed an issue where the pan_comm process stopped responding due to insufficient time allocated to read file descriptors when processing long messages.
    PAN-295049
    Fixed an issue where the logrcvr process stopped responding due to memory allocation errors during Redis communication.
    PAN-293985
    Fixed an issue with the Panorama web interface where admin users were unable to log in and received the error message 504: Gateway Timeout.
    PAN-292770
    Fixed an issue where, after reinstalling the device certificate, delayed telemetry data was displayed in AIOPS.
    PAN-291661
    Fixed an issue on Panorama appliances and Log Collectors where, after an upgrade, Elasticsearch intermittently entered into a Red state before automatically recovering.
    PAN-288388
    Fixed an issue where, after an EDL certificate update or repository migration, authentication failures caused the firewall to not fall back to the last successfully cached EDL entries, which led to policy rules that referenced the EDL to not be enforced.
    PAN-287842
    Fixed an issue where the comm process stopped responding due to missing heartbeats, which resulted in a system alert and HA communication loss on slot1.
    PAN-285169
    Fixed an issue on Panorama where Kerberos superusers were unable to edit policy rules because the target device tab was grayed out.
    PAN-281797
    Fixed an issue where firewalls became unstable and stopped responding, which resulted in an OOM condition.
    PAN-280917
    Fixed an issue on Panorama where the WildFire cloud URL contained an extra period character, which prevented the retrieval of WildFire analysis reports.
    PAN-279829
    Fixed an issue where NAT pool leaks occurred during a test when RTSP traffic hit NAT rules.
    PAN-270554
    Fixed an issue where the GlobalProtect client (UWP) or metered hotspot connections triggered TLS resumption fo GlobalProtect portal authentication, which caused the portal authentication to fail with a valid cert required error.
    PAN-264131
    Fixed an issue where the routed process core failed the automation run.
    PAN-209516
    Fixed an issue where, when creating an interface, an error occurred when you clicked OK without providing a value in the Tag field even though the field was not displayed as mandatory.
    PAN-185731
    Fixed an issue where the firewall was unable to parse the URL path and host when the host header was located in a different packet, which resulted in the firewall not logging the URL path in the first packet.
    The fix is disabled by default. The following CLI commands can be used to enable/disable the feature: set system setting ctd url-crosspkt-host-path-caching enable set system setting ctd url-crosspkt-host-path-caching disable set system setting ctd url-crosspkt-host-path-caching default

    © 2026 Palo Alto Networks, Inc. All rights reserved.