Prisma Access
Aryaka SD-WAN Solution Guide
Table of Contents
Expand All
|
Collapse All
Prisma Access Docs
-
- 6.0 Preferred and Innovation
- 5.2 Preferred and Innovation
- 5.1 Preferred and Innovation
- 5.0 Preferred and Innovation
- 4.2 Preferred
- 4.1 Preferred
- 4.0 Preferred
- 3.2 Preferred and Innovation
- 3.1 Preferred and Innovation
- 3.0 Preferred and Innovation
- 2.2 Preferred
-
-
- 4.0 & Later
- Prisma Access China
-
-
Aryaka SD-WAN Solution Guide
Integrate an Aryaka SD-WAN with Prisma Access.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
Aryaka and Prisma Access seamlessly integrate to deliver a joint solution of a
cloud-native global SD-WAN that includes private connectivity, WAN optimization, and
application acceleration capabilities with a next-generation security platform that
provides a consistent level of security in both physical and virtual environments.
Aryaka's SmartConnect delivers service level agreement (SLA)-based reliable global
connectivity and faster application performance for both on-premises and cloud/SaaS
applications, while Prisma Access adds a layer of advanced security controls required
for internet- and cloud-bound traffic.
The Aryaka edge device, Aryaka Network Access Point (ANAP), can seamlessly forward all
internet traffic from branch locations to Prisma Access using a secure IPSec tunnel.
Together, Aryaka and Prisma Access deliver a best-of-breed SD-WAN and security platform
for enterprises accessing mission-critical internally hosted applications, as well
accessing cloud applications using the internet.
This solution guide provides you with the tasks you perform to integrate a branch
location using Aryaka SmartConnect with Prisma Access.
Supported IKE and IPSec Cryptographic Profiles
You onboard your SD-WAN edge devices using a remote network connection between the
edge device at the branch site, HQ, or hub to Prisma Access. To do this you will
onboard a remote network, ensuring that you use supported IKE and IPSec
cryptographic settings.
The following table documents the IKE/IPSec crypto settings that are supported with
Prisma Access and the Aryaka SD-WAN. In addition, the supported architecture types
are listed at the end of the table. A check mark indicates that the profile or
architecture type is supported; a dash (—) indicates that it's not supported.
Default and Recommended settings are noted in the table.
| Crypto Profiles | Prisma Access | Aryaka SmartConnect | |
|---|---|---|---|
| Tunnel Type | IPSec Tunnel |
√
|
√
|
| GRE Tunnel | — | — | |
| Routing | Static Routes |
√
|
√
|
| Dynamic Routing (BGP) |
√
| — | |
| Dynamic Routing (OSPF) | — | — | |
| IKE Versions | IKE v1 |
√
|
√
|
| IKE v2 |
√
| — | |
| IPSec Phase 1 DH-Group | Group 1 |
√
| — |
| Group 2 | √ (Default) | √ (Default) | |
| Group 5 |
√
|
√
| |
| Group 14 |
√
|
√
| |
| Group 19 |
√
| — | |
| Group 20 | √ (Recommended) | — | |
| IPSec Phase 1 Auth If you use
IKEv2 with certificate-based authentication, only SHA1 is
supported in IKE crypto profiles (Phase 1). | MD5 |
√
|
√
|
| SHA1 | √ (Default) | √ (Default) | |
| SHA256 |
√
|
√
| |
| SHA384 |
√
|
√
| |
| SHA512 | √ (Recommended) |
√
| |
| IPSec Phase 1 Encryption | DES |
√
| — |
| 3DES | √ (Default) |
√
| |
| AES-128-CBC | √ (Default) | √ (Default) | |
| AES-192-CBC |
√
| — | |
| AES-256-CBC | √ (Recommended) | — | |
| IPSec Phase 1 Key Lifetime Default | √ (8 Hours) | √ (8 Hours) | |
| IPSec Phase 1 Peer Authentication | Pre-Shared Key |
√
|
√
|
| Certificate |
√
| — | |
| IKE Peer Identification | FQDN |
√
|
√
|
| IP Address |
√
|
√
| |
| User FQDN |
√
| — | |
| IKE Peer | As Static Peer |
√
|
√
|
| As Dynamic Peer |
√
| — | |
| Options | NAT Traversal |
√
|
√
|
| Passive Mode |
√
| — | |
| Ability to Negotiate Tunnel | Per Subnet Pair |
√
| — |
| Per Pair of Hosts |
√
| — | |
| Per Gateway Pair |
√
| — | |
| IPSec Phase 2 DH-Group | Group 1 |
√
| — |
| Group 2 | √ (Default) | √ (Default) | |
| Group 5 |
√
|
√
| |
| Group 14 |
√
|
√
| |
| Group 19 |
√
| — | |
| Group 20 | √ (Recommended) | — | |
| No PFS |
√
|
√
| |
| IPSec Phase 2 Auth | MD5 |
√
| — |
| SHA1 | √ (Default) | √ (Default) | |
| SHA256 |
√
|
√
| |
| SHA384 |
√
|
√
| |
| SHA512 | √ (Recommended) |
√
| |
| None |
√
|
√
| |
| IPSec Phase 2 Encryption | DES |
√
| — |
| 3DES | √ (Default) |
√
| |
| AES-128-CBC | √ (Default) |
√
| |
| AES-192-CBC |
√
| — | |
| AES-256-CBC |
√
| — | |
| AES-128-CCM |
√
| — | |
| AES-128-GCM |
√
| — | |
| AES-256-GCM | √ (Recommended) | — | |
| NULL |
√
|
√
| |
| IPSec Protocol | ESP |
√
|
√
|
| AH |
√
| — | |
| IPSec Phase 2 Key Lifetime Default | √ (1 Hour) | √ (1 Hour) | |
| Tunnel Monitoring Fallback | Dead Peer Detection (DPD) |
√
|
√
|
| ICMP | — | — | |
| Bidirectional Forwarding Detection (BFD) | — | — | |
| SD-WAN Architecture Type | With Regional Hub/Gateway/Data Center | N/A |
√
|
| No Regional Hub/Gateway/Data Center | NA |
√
| |