Enable Autonomous DEM in Prisma Access (Panorama Managed CloudBlade)

1. Open Panorama.
2. In the left panel, expand Cloud Services and click Configuration.
3. Click the Remote Networks tab.
4. Click the gear icon on the top right corner of the Aggregate Bandwidth and Autonomous DEM Settings card to open the Bandwidth Allocation dialog.
5. Select the Enable check box next to the compute location to allocate the bandwidth for its Remote Networks.

   The Autonomous DEM Allocation column will be visible only if you have purchased the ADEM for Remote Networks license.
6. Click OK.
7. Add the following URLs to make the SD-WAN site register to the ADEM portal:

   1. In Panorama, go to Objectaddresses. Click on Add and add the following ADEM Service Destination FQDNs.
      • agents.dem.prismaaccess.com
      • agents.jp1.ap-northeast-1.dem.prismaaccess.com
      • agents.sg1.ap-southeast-1.dem.prismaaccess.com
      • agents.au1.ap-southeast-2.dem.prismaaccess.com
      • agents.ca1.ca-central-1.dem.prismaaccess.com
      • agents.eu1.eu-central-1.dem.prismaaccess.com
      • agents.uk1.eu-west-2.dem.prismaaccess.com
      • agents.us1.us-east-2.dem.prismaaccess.com
      • updates.dem.prismaaccess.com
      • agents.in1.ap-south-1.dem.prismaaccess.com
   2. Create an address group to contain the addresses above by going toObjectAddress Groups, clicking Add and providing a name for the address group.
   3. Add the address group you just created into the security policy. Go to PoliciesSecurityPreRules. Click Add and add the address group to the policy.