Determine IPSec Termination Nodes (Cloud Managed CloudBlade)

Table of Contents

Filter

Expand All | Collapse All

Determine the IPSec termination nodes in the Cloud Managed CloudBlade to begin configuration of a Remote Networking on-boarding.

In Prisma Access, go to the WorkflowsPrisma Access SetupAdd Remote NetworkAdd Remote Network.
In the General section, select a region from the Prisma Access Location drop-down.
After you choose the location, select from the available SPN names from the IPSec Termination Node drop-down.

IPSec Termination Node Conventions and Tag Nomenclature

Below is an example for the tagging methodology and tag constructs with aggregate bandwidth licensing for the CloudBlade.

Prisma_region: <<region name>>:<<IPSec Termination Node Name or Number>>

With this construct, the tags for the interfaces will look similar to the following. For example:

prisma_region:eu-west-3:france-north-portia

prisma_region:eu-west-3:france-north-bluebells

prisma_region:eu-west-3:1

prisma_region:eu-west-3:2

The node name (france-north-portia) or order that the node appears in the list (1) can both be used in the naming convention for the interface tags.

You can refer to the region tag codes of the Prisma Access Regions.

To aid in automating scripts and deployments, the Prisma SD-WAN Tagger script can also be used to create or configure the tags.