Prisma SD-WAN ION Device Release Notes
    : Known Issues in Prisma SD-WAN ION Device Release 6.0.1
    Focus
    Download PDF
    Focus
    1. Home
    2. Prisma
    3. Prisma SD-WAN
    4. Prisma SD-WAN ION Device Release Notes
    5. Prisma SD-WAN ION Device Release 6-0
    6. Known Issues in Prisma SD-WAN ION Release 6.0
    7. Known Issues in Prisma SD-WAN ION Device Release 6.0.1
    Download PDF

    Prisma SD-WAN ION Device Release Notes

    Known Issues in Prisma SD-WAN ION Device Release 6.0.1

    Table of Contents

    Known Issues in Prisma SD-WAN ION Device Release 6.0.1

    Learn about the known issues in Prisma SD-WAN ION release 6.0.1.
    The following list includes outstanding known issues specific to Prisma SD-WAN ION release 6.0.1.
    Issue ID
    Description
    CGSDW-6186
    When you upgrade a branch ION device to Release 6.0.1 or above, and then unassign the device from a site, it will be in the
    Claimed
     state. However, if you try to assign the device immediately to a site, it may remain in the
    Assigning
     state. The workaround is to retry the
    Assign
     operation.
    CGSDW-7374
    For a 7K ION device, the web interface and CLI take longer to update the module status. When you run the
    dump interface status interface module
     command on a 7K ION device, it takes up to two minutes to recognize and display the output on the web interface and CLI.
    CGSDW-14456
    The
    fc-cp
     process crashes in the new primary device post HA failover.

    Recommended For You

    © 2024 Palo Alto Networks, Inc. All rights reserved.