Migration Support from On-Premise CloudBlade to Panorama

Upgrade the Panorama cloud plug-in version to
4.1.0-H38
,
4.0.0-H72
, and
3.2.1-H83
.
Change the
Prisma Access
for Networks (managed by Panorama) CloudBlade version from 3.x to the required 4.x version on the
Prisma SD-WAN
web interface.

Stop the 3.x Panorama Integration Container.
Enable the
Prisma SD-WAN
integration in the Panorama web interface (if not already enabled).
Check the
Messages
tab to validate if the migration is complete and the
Prisma Access
for Networks 4. x version CloudBlade is running successfully.

For example, if the message
Waiting for data from Prisma, Retrying in 180 secs appears
, it indicates that the CloudBlade is initializing and waiting for data from Panorama. After all required data is received, the CloudBlade will start functioning.