Integrate IoT Security with Cisco Prime
Import select device details into IoT Security from Cisco
Prime Infrastructure.
By integrating through Cortex XSOAR with Cisco
Prime Infrastructure, IoT Security imports select information about
the devices (or
endpoints
) it’s monitoring from Cisco Prime.
A specified on-premises XSOAR engine fetches the following information
from Cisco Prime and then sends it through the Cortex XSOAR cloud
to IoT Security to incorporate into the data it has already gathered
from network traffic and behavior analysis:- Connection type—wired or wirelessIf it’s a wired device:
- Name and IP address of the switch with which the device is connected
- Ethernet port on the switch to which the device is connected
If it’s a wireless device:- Hostname and IP address of the switch that’s cabled to the AP (access point) serving the wireless device
- Ethernet port number on the switch to which the AP is cabled
- ID and name of the VLAN to which the device is assigned
With
this information, IoT Security can provide more granular endpoint
reports and better detection of misconfigurations and anomalies.
For example, the following illustrations show information that IoT
Security learned from Cisco Prime Infrastructure about a PACS station
named GRADLT900:
- Connection type: wireless
- The hostname and IP address of the switch that’s cabled to the AP serving GRADLT900
- The Ethernet port number on the switch to which the AP is cabled
- The VLAN to which the PACS station is assigned
IoT
Security can integrate with multiple Cisco Prime instances at one
site or multiple sites, which is sometimes necessary for large deployments
where a single Prime instance is not enough. In these cases, one
or more XSOAR engines integrate with one or more of the Prime instances.
Make
sure each XSOAR engine can form a network connection on TCP port
443 to the Prime instance with which it’s coupled. Then follow the
instructions below to set up the integration between the two.
Integrating
with Cisco Prime requires the purchase and activation of
a third-party integration add-on. The basic integration plan includes
a license for three integration add-ons, one of which can be used
for Cisco Prime. The advanced plan includes a license for all supported
third-party integrations.
