The larger the network, the more difficult it’s to protect. A large, unsegmented network presents a large attack surface that can be difficult to manage and protect. Because traffic and applications have access to the entire network, once an attacker gains entry to a network, the attacker can move laterally through the network to access critical data. A large network is also more difficult to monitor and control. Segmenting the network limits an attacker’s ability to move through the network by preventing lateral movement between zones.

A security zone is a group of one or more firewall interfaces and the network segments connected to the zone’s interfaces. You control protection for each zone individually so that each zone receives the specific protections it needs. For example, a zone for the finance department might not need to allow all of the applications that a zone for IT allows.

To fully protect your network, all traffic must flow through the firewall. Configure interfaces and zones to create separate zones for different functional areas such as the internet gateway, sensitive data storage, and business applications, and for different organizational groups such as finance, IT, marketing, and engineering. Wherever there’s a logical division of functionality, application usage, or user access privileges, you can create a separate zone to isolate and protect the area and apply the appropriate Security policy rules to prevent unnecessary access to data and applications that only one or some groups need to access. The more granular the zones, the greater the visibility and control you have over network traffic. Dividing your network into zones helps to create a Zero Trust architecture that executes a security philosophy of trusting no users, devices, applications, or packets, and verifying everything. The end goal is to create a network that allows access only to the users, devices, and applications that have legitimate business needs, and to deny all other traffic.

How to appropriately restrict and permit access to zones depends on the network environment. For example, environments such as semiconductor manufacturing floors or robotic assembly plants, where the workstations control sensitive manufacturing equipment, or highly restricted access areas, might require physical segmentation that permits no access from outside devices (no mobile device access).

The protection requirements for different functional areas and groups might also differ. For example, a zone that handles a large amount of traffic might require different flood protection thresholds than a zone that normally handles less traffic. The ability to define the appropriate protection for each zone is another reason to segment the network. What appropriate protection is depends on your network architecture, what you want to protect, and what traffic you want to permit and deny.