Add a ZTP Firewall to Panorama

Add a ZTP firewall to be managed by the Panorama management server.
Log in to the web interface of the Panorama™ management server as a Superuser, Panorama admin, or as the ZTP installer admin to add a ZTP firewall to Panorama. To add the ZTP firewall, you must enter the firewall serial number and claim key provided by Palo Alto Networks and then register the firewall with the ZTP service. Registering the firewall claims the firewall as an asset in your account in the Customer Support Portal and allows the ZTP service to associate the firewall with the Panorama.
  1. Add a ZTP firewall to Panorama.
    1. Select
      Firewall Registration
      and
      Add
      a new ZTP firewall.
    2. Enter the
      Serial Number
      of the ZTP firewall.
    3. Enter the
      Claim Key
      for the ZTP firewall provided by Palo Alto Networks.
      The eight digit numeric claim key is printed on a physical label attached to the back of the ZTP firewall you received from Palo Alto Networks.
      ztp-claim-key-location.png
    4. Click
      OK
      to save your configuration changes.
      ztp-installer-add-firewall.png
  2. Register the ZTP firewall.
    1. Select the newly added ZTP firewall and
      Register
      the firewall.
    2. When prompted, click
      Yes
      to confirm registering the ZTP firewall.
  3. Verify the firewall successfully registered with the ZTP service.
    1. Select
      Registration Status
      and verify that the ZTP firewall successfully registered with the ZTP service.
      ztp-installer-register-firewall-verify.png
    2. Log in to the Panorama Web Interface using admin credentials.
    3. Select
      Panorama
      Managed Devices
      Summary
      and verify that the ZTP firewall is successfully added as a managed firewall.
      Ensure that the
      To SW Version
      column is configured to the correct PAN-OS version so that the firewall does not upgrade or downgrade unintentionally. ZTP functionality is supported only for PAN-OS 9.1.3 and later releases. Additionally, the PAN-OS version must be the same or an earlier version of the PAN-OS version running on Panorama.
      For more information, see Upgrade a ZTP Firewall.
  4. Add the ZTP firewall to device group and template stack.
    You must add the ZTP firewall to a device group and template stack to push policy and network configurations.
    1. Log in to the Panorama Web Interface using admin credentials.
    2. Select
      Panorama
      Device Groups
      , add a device group, and the ZTP firewall to the device group.
    3. Select
      Panorama
      Templates
      , configure a template stack, and the ZTP firewall to the template stack.

Recommended For You