The log storage capacity for the Collector
Group might display as 0MB if the disk pairs are not enabled for
logging in the Log Collectors. To enable the disk pairs, perform
the following steps for each Log Collector in the Collector Group.
Add the RAID disk pairs.
Select
Panorama
Managed Collectors
and click
the Collector Name.
Select
Disks
,
Add
each
RAID disk pair, and click
OK
.
Commit the changes to Panorama and push the changes to
the Collector Group.
Select
Commit
Commit and Push
and
Edit
Selections
in the Push Scope.
Select
Collector Groups
, select
the Collector Group you modified, and click
OK
.
Commit and Push
your changes.
Verify the state of the Log Collectors and disk pairs.
Select
Panorama
Managed Collectors
and verify
that the configuration of each Log Collector is synchronized with
Panorama.
The Configuration Status column should display
In
Sync
and the Run Time Status column should display
connected
.
Click
Statistics
in the last
column for each Log Collector and verify that the disk pairs are