Migrate from an M-200 or M-600 Appliance to an M-300 or M-700 Appliance

1. Plan the migration.

   • Ensure the new Panorama is ready with a Device management and support license. These base licenses enable core functionalities of Panorama to operate successfully, such as onboarding firewalls, downloading threat and content updates, and generating OTPs for Panorama certificates.
   • Upgrade the M-600 appliance to the latest software and content version.
   • Install the latest software and content versions on the M-700 appliance. Both the M-600 and M-700 appliances must run on the same PAN-OS version. For important details about software versions, see Panorama, Log Collector, Firewall, and WildFire Version Compatibility.
   • Ensure that both the M-600 and M-700 appliances are on the same system mode.
   • Schedule a maintenance window for the migration. Firewalls can buffer logs after the M-600 appliance goes offline and then forward the logs after the M-700 appliance comes online. However, completing the migration during a maintenance window ensures that the logs do not exceed the buffer capacities and are not lost during the transition between Panorama models.
   • Capture and export a fresh set of running configurations from your old Panorama.
   • If the new Panorama keeps the same IP address, you must migrate the migrate the SC3 security certificates to ensure that the managed firewalls onboarded using an auth key automatically reconnect (without requiring re-onboarding).

     Your old Panorama must be running PAN-OS 11.1.8 or a later 11.1 release, or PAN-OS 11.2.5 or a later release, to use the SC3 certificate migration feature.
   • (Prisma Access) Plan to transfer your Prisma Access licenses to the new target appliance.
   • (SD-WAN only) Plan export the MongoDB database, in addition to your standard configuration snapshot, to the new Panorama.
     Contact Palo Alto Networks Customer Support for assistance with running database export commands.
2. Purchase the new M-700 appliance, and migrate your subscriptions to the new appliance.

   1. Purchase the new M-700 appliance.
   2. Purchase the new support license and migration license.
   3. When purchasing the new M-700 appliance, provide your sales representative with the serial number and device management auth-code of the M-700 appliance that you are phasing out, and the date when you expect your migration. After you receive the M-700 appliance, register it and activate the device management and support licenses by using the migration and support auth-codes from Palo Alto Networks. On the migration date, the device management license on the M-600 will be decommissioned, preventing you from managing devices or collecting logs using the M-600 appliance. However, the support license is preserved and the Panorama appliance remains under support. You can complete the migration after the effective date, but you will not be able to commit any configuration changes on the decommissioned M-600 appliance. Palo Alto Networks allows up to a 90 day migration grace period when migrating between M-Series appliances. Contact your Palo Alto Networks sales representative for more information about your migration.
3. Perform the initial setup of the M-700 appliance.

   1. Rack mount the M-700 appliances. For more information, refer to the M-300 and M-700 Appliance Hardware Reference guide.
   2. Set Up the M-series appliance.
   3. Perform Initial Configuration of the M-series appliance.
   4. Register Panorama.
   5. Activate a Panorama Support License.
   6. (Optional) For Panorama-managed Prisma Access, ensure that you transfer the licenses to the new panorama appliance.
   7. This step is required before loading configuration from the old Panorama virtual appliance. Ensure that all required content updates are installed to avoid security outages.
      Install Content and Software Updates for Panorama. Install the same versions as those on the M-Series appliance.
   8. (PAN-OS 11.2.x and earlier releases) Select PanoramaPlugins and install all plugins that were installed on the old Panorama virtual appliance.
4. Add the IP address of the new Panorama.

   On M-600 appliance, add the Public IP address of the new Panorama as the second Panorama Server to manage devices from the new Panorama management server.

   1. Select DeviceSetup.
   2. In the Template context drop-down, select the template or template stack containing the Panorama server configuration.
   3. Edit the Panorama Settings.
   4. Enter the M-700 appliance public IP address and click OK.
   5. Select CommitCommit and Push.
5. Export the Panorama configuration from the M-600 appliance.

   1. Log in to the Panorama web interface.
   2. Select PanoramaSetupOperations.
   3. Click Save named Panorama configuration snapshot, enter a Name to identify the configuration, and click OK.
   4. Click Export named Panorama configuration snapshot, select the Name of the configuration you just saved, and click OK.

      Panorama exports the configuration to your client system as an XML file.
   5. (SD-WAN Only) Export the mongodump to your external SCP server by entering the following command: mongodump --db pl_sd_wan -o /opt/panlogs/ld1/mdbdump

      Contact Palo Alto Networks Customer Support for assistance with running database export commands.
6. Load the Panorama configuration snapshot that you exported from the M-600 appliance into the M-700 Panorama mode.

   The Panorama Policy rule Creation and Modified dates are updated to reflect the date you commit the imported Panorama configuration on the new Panorama. The universally unique identifier (UUID) for each policy rule persists when you migrate the Panorama configuration.

   The Creation and Modified for managed firewalls are not impacted when you monitor policy rule usage for a managed firewall because this data is stored locally on the managed firewall and not on Panorama.

   1. Log in to the Panorama web interface of the M-700 appliance.
   2. Select PanoramaSetupOperations.
   3. Click Import named Panorama configuration snapshot.
   4. Browse for the configuration file you exported from the M-600 appliance, and click OK.
   5. Click Load named Panorama configuration snapshot, and select the Name of the configuration you just imported.
   6. Select a Decryption Key (the master key for Panorama) and click OK.
   7. (SD-WAN only) Import the mongodump, which you previously exported, from the SCP server and restore it to the new Panorama by using the following command. mongorestore --db pl_sd_wan pl_sd_wan

      Contact Palo Alto Networks Customer Support for assistance with running database export commands.
   8. Panorama overwrites its current candidate configuration with the loaded configuration. Panorama displays any errors that occur when loading the configuration file. If errors occur, save the errors to a local file. Resolve each error to ensure the migrated configuration is valid.
7. Review the network configuration on the M-700 appliance.

   1. (Optional) Log in to the Panorama web interface of the M-600 appliance, select PanoramaSetupOperations, and click Shutdown Panorama.

      Shut down the M-600 appliance if you plan to have the same IP address on both the M-600 and M-700 appliances.
   2. Log in to the Panorama web interface of the M-700 appliance, select PanoramaSetupInterfaces, and verify the network configuration on the Management interface to ensure that the connectivity to the M-700 appliance is not disrupted post commit.
   3. Ensure that all the interface configurations are set up based on your requirements for the M-700 appliance.
8. Select CommitCommit to PanoramaValidate Commit to review and resolve any configuration issues. Commit the Panorama configuration.
9. Generate a new device registration authentication key for managed device connectivity.

   1. In the Panorama web interface of the M-700 appliance, select PanoramaDevice Registration Auth Key and Add a new authentication key.
   2. Configure the authentication key.

      • Name—Enter a descriptive name for the authentication key.
      • Lifetime—Enter the key lifetime to specify the duration of the validity of the authentication key.
      • Count—Enter the number of devices that will use the authentication key for connecting to Panorama.
      • Device Type—Specify whether the authentication key may be used for Firewalls, Log Collectors, or Any device.
   3. Click OK.
   4. Copy Auth Key and Close.
10. Migrate the SC3 certificates to ensure your existing managed firewalls automatically trust and reconnect to the new Panorama without manual intervention.

    This is required when transitioning from one Panorama model to another.
11. After you complete the migration, connectivity to the managed log collectors is lost. Recover connectivity to the managed log collectors.

    1. Log in to the Dedicated Log Collector CLI.
    2. (Optional) If the IP address of the M-700 appliance is different from the M-600 appliance, update the panorama-server IP address.

       admin> configure
       admin # set deviceconfig system panorama-server <panorama-ip> [panorama-server-2 <panorama-ha-peer-ip>]
       admin# Commit
       admin# exit
       

    3. Reset the secure connection state.

       This command resets the managed device connection to Panorama and is irreversible.

       admin>
       request sc3 reset

    4. Restart the management server on the managed device.

       admin>
         debug software restart process management-server
       

    5. Add the device registration authentication key you copied in Step 8.

       admin>
             request authkey set <auth_key>
       

    6. Verify the managed device connectivity to Panorama.

       admin>
       show panorama-status
       

       Verify that the IP address of the M-700 appliance appears and the Panorama server Connected status displays yes.
12. Select CommitCommit to PanoramaValidate Commit to review and resolve any configuration issues. Commit the Panorama configuration. Next, Commit All Changes to the Panorama configuration.
13. Synchronize the M-700 appliance with the managed devices.

    1. Select CommitPush to Devices and Edit Selections.
    2. Select all the devices under Device Groups, Templates, and Collector Groups, and click OK.
    3. Push All Changes.
    4. Select PanoramaManaged DevicesSummary, and verify that all the firewalls are connected. Also, verify that the shared policy and template configurations of the firewalls are In sync with Panorama.
    5. Select PanoramaManaged Collectors, and verify that the configuration status is In Sync with Panorama, and the health status is Green for all the log collectors.
14. (HA only) Set up the Panorama HA peer.

    If the Panorama management servers are in a high availability configuration, perform the steps below on the HA peer.

    1. Perform the initial setup of the M-Series appliance.
    2. Add the IP address of the new Panorama.
15. (HA only) Modify the M-series appliance HA peer configuration.

    1. On an HA peer, log in to the Panorama web interface, select PanoramaHigh Availability and edit the Setup.
    2. In the Peer HA IP Address field, enter the new IP address of the HA peer and click OK.
    3. Select CommitCommit to Panorama and Commit your change
    4. Repeat these steps on the other peer in the HA peer.
16. (HA only) Synchronize the Panorama peers.

    1. Access the Dashboard on one of the HA peers and select WidgetsSystemHigh Availability to display the HA widget.
    2. Sync to peer, click Yes, and wait for the Running Config to display Synchronized.
    3. Access the Dashboard on the remaining HA peer and select WidgetsSystemHigh Availability to display the HA widget.
    4. Verify that the Running Config displays Synchronized.

    After you migrate, if there are connectivity issues between Panorama and the managed firewalls, recover the connectivity of the managed devices to Panorama to resolve the issues.