View the Multicast Route Table
Table of Contents
Expand all | Collapse all
-
-
- Add a Branch
- Add a Data Center
- Add a Branch Gateway
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Prisma SD-WAN Incidents and Alerts
View the Multicast Route Table
Learn how to view the multicast route table in Prisma
SD-WAN.
| Where Can I Use This? | What Do I Need? |
|---|---|
|
|
The multicast route table entries indicate how multicast traffic is routed to hosts in the
network. You can view the multicast route table either through the device
configuration or through View Routing Statistics. View the LAN multicast route table for branch ION devices
running version 5.6.1 or higher. View the WAN multicast route table for branch and
data center ION devices running version 6.0.1 or higher.
- View the LAN multicast route table.
- Select ManageSetupDevicesClaimed DevicesConfigure the deviceRoutingMulticastLAN Multicast Route Table.The field descriptions in the multicast route table are based on the PIM-SM protocol outlined in https://datatracker.ietf.org/doc/html/rfc2362.
Field Description Source Displays the source address of multicast traffic in the network. Group Displays the multicast group address. RP Address Displays the address of the Rendezvous Point (RP) in the network. Am I RP? Indicates if the interface or router is configured as an RP in the network. Available only for devices running versions higher than 5.6.1 but lower than 6.0.1. Flags For device versions lower than 6.0.1 - RP—Indicates Join/Prune messages propagated towards a shared RP tree.
- WC—Indicates a Wild card entry (*, G).
- SPT—Indicates Join/Prune messages propagated towards a source.
- NEW—Indicates a new route entry.
- CACHE—Indicates an entry cached in the kernel.
- NULL—Indicates that information received should not be forwarded.
Flags For device versions 6.0.1 and higher - S: Sparse—Indicates that PIM Sparse mode is in use.
- C: Connected—Indicates that a multicast receiver is directly connected to the branch ION device.
- P: Pruned—Indicates Join/Prune messages propagated towards a source.
- R: SGRpt Pruned—Indicates that traffic is being forwarded using the RP tree.
- F: Register Flag—Indicates the traffic is arriving and set on a (*, G).
- T: SPT—bit set—Indicates that at least one packet was received via the SPT.
Incoming Interface Indicates the interface on which multicast traffic is received. Outgoing Interfaces Indicates the interfaces on which multicast traffic needs to be replicated. View the WAN multicast route table.- Select ManageSetupDevicesClaimed DevicesConfigure the deviceRoutingMulticastWAN Multicast Route Table.The field descriptions in the multicast route table are based on the PIM-SM protocol outlined in https://datatracker.ietf.org/doc/html/rfc2362.
Field Description Source Displays the source address of multicast traffic in the network. Group Displays the multicast group address. RP Address Displays the address of the Rendezvous Point (RP) in the network. Flags - S: Sparse—Indicates that PIM Sparse mode is in use.
- C: Connected—Indicates that a multicast receiver is directly connected.
- P: Pruned—Indicates Join/Prune messages propagated towards a source.
- R: SGRpt Pruned—Indicates that traffic is being forwarded using the RP tree.
- F: Register Flag—Indicates the traffic is arriving and set on a (*, G).
- T: SPT—bit set—Indicates that at least one packet was received via the SPT.
Incoming Site/Interface Indicates the interface or the site from which multicast traffic is received. Outgoing Sites/Interfaces Indicates the interfaces or sites on which multicast traffic needs to be replicated.