View Multicast Flow Statistics
Table of Contents
Expand all | Collapse all
-
-
- Configure Circuits
- Configure Internet Circuit Underlay Link Aggregation
- Configure Private WAN Underlay Link Quality Aggregation
- Configure Circuit Categories
- Configure Device Initiated Connections for Circuits
- Add Public IP LAN Address to Enterprise Prefixes
- Manage Data Center Clusters
- Configure a Site Prefix
- Configure a DHCP Server
- Configure NTP for Prisma SD-WAN
- Enable IoT Device Visibility in Prisma SD-WAN
- Configure the ION Device at a Branch Site
- Configure the ION Device at a Data Center
- Switch a Site to Control Mode
- Allow IP Addresses in Firewall Configuration
-
- Configure a Controller Port
- Configure Internet Ports
- Configure WAN/LAN Ports
- Configure a Loopback Interface
- Prisma SD-WAN Standard VPN
- Configure a PoE Port
- Configure and Monitor LLDP Activity and Status
- Configure a PPPoE Interface
- Configure a Layer 3 LAN Interface
- Configure Application Reachability Probes
- Configure a Secondary IP Address
- Configure a Static ARP
- Configure a DHCP Relay
- Configure IP Directed Broadcast
- VPN Keep-Alives
-
- Configure Prisma SD-WAN IPFIX
- Configure IPFIX Profiles and Templates
- Configure and Attach a Collector Context to a Device Interface in IPFIX
- Configure and Attach a Filter Context to a Device Interface in IPFIX
- Configure Global and Local IPFIX Prefixes
- Flow Information Elements
- Options Information Elements
- Configure the DNS Service on the Prisma SD-WAN Interface
- Configure SNMP
-
-
- Prisma SD-WAN Branch Routing
- Prisma SD-WAN Data Center Routing
-
- Configure Multicast
- Create a WAN Multicast Configuration Profile
- Assign WAN Multicast Configuration Profiles to Branch Sites
- Configure a Multicast Source at a Branch Site
- Configure Global Multicast Parameters
- Configure a Multicast Static Rendezvous Point (RP)
- Learn Rendezvous Points (RPs) Dynamically
- View LAN Statistics for Multicast
- View WAN Statistics for Multicast
- View IGMP Membership
- View the Multicast Route Table
- View Multicast Flow Statistics
- View Routing Statistics
- Prisma SD-WAN Incident Policies
-
- Prisma SD-WAN Branch HA Key Concepts
- Configure Branch HA
- Configure HA Groups
- Add ION Devices to HA Groups
- View Device Configuration of HA Groups
- Edit HA Groups and Group Membership
-
- Configure Branch HA with Gen-1 Platforms (2000, 3000, 7000, and 9000)
- Configure Branch HA with Gen-2 Platforms (3200, 5200, and 9200)
- Configure Branch HA with Gen-2 Embedded Switch Platforms (1200-S or 3200-L2)
- Configure Branch HA for Devices with Software Cellular Bypass (1200-S-C-5G)
- Configure Branch HA for Platforms without Bypass Pairs
- Prisma SD-WAN Clarity Reports
-
- Native SASE Integration with Prisma SD-WAN
- Connect a Single Prisma SD-WAN Site to Prisma Access
- Connect Multiple Prisma SD-WAN Sites to Prisma Access
- Edit Application Policy Network Rules
- Understand Service and Data Center Groups
- Verify Standard VPN Endpoints
- Configure Standard Groups
- Assign Domains to Sites
- Prisma SD-WAN Incidents and Alerts
View Multicast Flow Statistics
Learn how to view multicast flow statistics in Prisma
SD-WAN.
Prisma SD-WAN
branch ION devices provide statistics
for multicast traffic by detecting custom applications configured
for multicast. You must configure custom applications based
on L3/L4 characteristics for multicast traffic statistics to be
displayed under Activity
Flows
You
can view multicast traffic under for a custom application,
only if you create the custom application for a multicast group
before there is any multicast traffic for the group. If multicast
traffic is already flowing for a multicast group, and you create
a custom application for the multicast group, you have to restart
the traffic flow to view the traffic for the custom application
under .
Activity
Flows
Activity
Flows
Prisma
SD-WAN data center ION devices do not support flow processing and
application detection.
To view multicast flow statistics:
- Create a global prefix filter for multicast.
- Select.ManageResourcesPrefix FiltersGlobal
- Enter aName, an optionalDescription, and anIP Prefix.
Ensure that the IP Prefix points to the multicast host route.
- Define a custom application based on L3/L4 characteristics.
- Select.ManageResourcesApplications
- ClickAdd Application.
- Add aDisplay Nameand anAbbreviation.
- UnderApplication Configuration, selectNetwork (L3/L4).
- ClickAdd a new UDP rule.
- Add aPort RangeandPrefix Filterand an(optional)DSCPvalue between 0 to 63.
- ClickSubmit.
- View multicast flow statistics under.ActivityFlows